D9T Track-Type Tractor Machine Systems Caterpillar


Fan Reversing Valve - Install

Usage:

D9T NJH

安装步骤

表 1
所需工具    
工具     零件号     零件名称     数量    
A     9S-1366     螺栓     2    
B     138-7575     连杆支架     2    



    图 1g01081740

  1. 安装风扇反转阀 (14) 和螺栓 (13) 。 安装管组件 (12) 。



    图 2g01081734

  1. 安装接头 (10) 和 (9) 。 连接管组件 (8) 。 连接软管组件 (7) 。 连接线束组件 (11) 。



    图 3g01081709

  1. 安装用于固定管组件的夹子 (6) 。



    图 4g01081686

  1. 使用工具 (B) 和适当的起吊设备将板 (5) 安装到机器上。 板 (5) 的重量约为 34 kg (75 lb)。

  1. 安装工具 (A) ,以便支撑板 (5) 。

  1. 拆下工具 (B) 和相应的起吊设备。



    图 5g01081675

  1. 安装螺栓 (4) 。 从板 (5) 上拆下工具 (A) 。



    图 6g01081652

  1. 安装螺栓 (3) 。



    图 7g01081083

  1. 关闭门 (1) ,然后安装螺栓 (2) 。

  1. 给液压油箱加油。 请参考操作和保养手册, "容量(加注)"以了解正在维护的机器的液压油箱容量。 请参考操作和保养手册, "液压油箱油 - 更换"以了解正确的加注步骤。

End By: 安装前底部防护罩。 请参考 拆解和组装, "底部防护罩 - 拆卸"。

Caterpillar Information System:

826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Refrigerant Condenser - Remove and Install
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Refrigerant Compressor - Remove and Install
988H Wheel Loader Machine Systems Blower Motor (Air Conditioner, Heater) - Install
631G and 637G Wheel Tractor-Scrapers Machine Systems Piston Pump (Cushion-Hitch) - Remove
973C Track-Type Loader Steel Mill Supplement Hydrostatic Drive Oil (Steel Mill) - Change
930G Wheel Loader Braking and Hydraulic Fan System Brake and Planetary
988H Wheel Loader Machine Systems Blower Motor (Air Conditioner, Heater) - Remove
631G and 637G Wheel Tractor-Scrapers Machine Systems Relay Valve (Brake) - Remove and Install - Scraper
973C Track-Type Loader Steel Mill Supplement Additional Messages
973K Track-Type Loader Maintenance Recommendations
631G and 637G Wheel Tractor-Scrapers Machine Systems Brake Actuator - Install - Machine
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Seat - Install
631G and 637G Wheel Tractor-Scrapers Machine Systems Piston Pump (Cushion-Hitch) - Install
631G and 637G Wheel Tractor-Scrapers Machine Systems Accumulator (Cushion-Hitch) - Remove
988H Wheel Loader Machine Systems Evaporator Coil and Heater Coil - Remove
2004/08/02 New Air Hose Routing Procedure Is Now Being Used {1808}
631G and 637G Wheel Tractor-Scrapers Machine Systems Accumulator (Cushion-Hitch) - Install
988H Wheel Loader Machine Systems Evaporator Coil and Heater Coil - Install
631G and 637G Wheel Tractor-Scrapers Machine Systems Main Control Valve - Remove
AD55 Underground Articulated Truck Power Train Torque Converter and Transmission Hydraulic System Troubleshooting
AD55 Underground Articulated Truck System Pressure - Release
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System Backup Alarm Always On
258-4624 Wide Body Arrangement (16.8M3 SAE) Custom Support Literature for AD30 (S/N: CXR1-UP; DXR1-UP) Underground Articulated Truck{7258} 258-4624 Wide Body Arrangement (16.8M3 SAE) Custom Support Literature for AD30 (S/N: CXR1-UP; DXR1-UP) Underground Articulated Truck{7258}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Machine Systems Front Frame from Rear Frame - Separate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.