2006/02/13 Caterpillar


Two Adjustment Gauges Help the Technician Set the Lash for the Variable Valve Actuators {0703, 0763, 1100, 1209}

Usage:

657E 6PR
Agricultural Tractor:
MT855 (S/N: A3A1-UP)
Engine:
C-15 (S/N: Z2C1-UP; BEM1-UP)
C13 (S/N: KCB1-UP)
C15 (S/N: BXS1-UP)
Excavator:
365C (S/N: LHX1-UP)



Illustration 1g01078554

Two adjustment gauges help the technician set the valve lash for the variable valve actuators in the engines in the above products. The adjustment gauges have offset handles that allow easy access for the adjustment. The 228-3610 Feeler Gauge is used to set the valve lash on C-15 Engines. The feeler gauge has 22 blades. The blades range from 0.004 inch to 0.027 inch thick. The 235-0032 Valve Lash Gauge is used to set the valve lash on C-13 Engines. The valve lash gauge has two blades. The blades are 0.024 inch thick and 0.034 inch thick, respectively.

Caterpillar Information System:

C7 Marine Engines Fuel Transfer Pump - Install
G3520B Industrial Engine Electronic Service Tools
C7 Marine Engines Fuel Transfer Pump - Remove
C7 Marine Engines Fuel Filter Base - Remove and Install
C15 On-highway Engines Housing (Front) - Install
C15 On-highway Engines Housing (Front) - Remove
C7 Marine Engines Fuel Priming Pump - Remove and Install
2004/06/01 A New Special Instruction, REHS2259 , "Fabricated Tool for Alternate Method of Tightening Fan Drive Belts" is Available {1357, 1397}
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
3126B Petroleum Engine Event Codes
G3520B Industrial Engine Electrical Connectors and Functions
2004/07/05 243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
G3520B Industrial Engine System Configuration Parameters
Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397} Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397}
324D and 326D Excavators Work Tool Control Pedal - If Equipped
G3500 Engines Specifications
G3500 Engines Plate Locations and Film Locations
C11 and C13 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
325D and 329D Excavators Air Conditioning and Heating Control
C7 Marine Engines Injection Actuation Pressure Control Valve - Remove
C7 Marine Engines Injection Actuation Pressure Control Valve - Install
C7 Marine Engines Unit Injector Hydraulic Pump - Remove
C15 and C18 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C7 Marine Engines Unit Injector Hydraulic Pump - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.