Fuel Transfer Pump - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 1U-6396     | O-Ring Assembly Compound     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Lubricate the O-ring seal with Tooling (A) and install the O-ring seal on the unit injector hydraulic pump.
- Position fuel transfer pump (2) and install bolts (1). Tighten bolts (1) to a torque of 25 ± 3 N·m (18.4 ± 2.2 lb ft).
Show/hide table
Illustration 1 | g01087811 |
- Connect hose assembly (4) .
- Connect tube assembly (3) .
Caterpillar Information System:
G3520B Industrial Engine Electronic Service Tools
C7 Marine Engines Fuel Transfer Pump - Remove
C7 Marine Engines Fuel Filter Base - Remove and Install
C15 On-highway Engines Housing (Front) - Install
C15 On-highway Engines Housing (Front) - Remove
C7 Marine Engines Fuel Priming Pump - Remove and Install
2004/06/01 A New Special Instruction, REHS2259 , "Fabricated Tool for Alternate Method of Tightening Fan Drive Belts" is Available {1357, 1397}
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
3126B Petroleum Engine Event Codes
G3520B Industrial Engine Electrical Connectors and Functions
2004/07/05 243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/06/28 210-6990 Pressure Gauge (LCD Display, 0 to 500-PSI) Is Available for Use by Technicians {0770}
2006/02/13 Two Adjustment Gauges Help the Technician Set the Lash for the Variable Valve Actuators {0703, 0763, 1100, 1209}
G3520B Industrial Engine System Configuration Parameters
Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397} Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397}
324D and 326D Excavators Work Tool Control Pedal - If Equipped
G3500 Engines Specifications
G3500 Engines Plate Locations and Film Locations
C11 and C13 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
325D and 329D Excavators Air Conditioning and Heating Control
C7 Marine Engines Injection Actuation Pressure Control Valve - Remove
C7 Marine Engines Injection Actuation Pressure Control Valve - Install
C7 Marine Engines Unit Injector Hydraulic Pump - Remove
C15 and C18 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install