Fuel Transfer Pump - Remove
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect tube assembly (3) .
Show/hide table
Illustration 1 | g01087811 |
- Disconnect hose assembly (4) .
- Remove bolts (1) and fuel transfer pump (2) .
Caterpillar Information System:
C7 Marine Engines Fuel Filter Base - Remove and Install
C15 On-highway Engines Housing (Front) - Install
C15 On-highway Engines Housing (Front) - Remove
C7 Marine Engines Fuel Priming Pump - Remove and Install
2004/06/01 A New Special Instruction, REHS2259 , "Fabricated Tool for Alternate Method of Tightening Fan Drive Belts" is Available {1357, 1397}
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
3126B Petroleum Engine Event Codes
G3520B Industrial Engine Electrical Connectors and Functions
2004/07/05 243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/06/28 210-6990 Pressure Gauge (LCD Display, 0 to 500-PSI) Is Available for Use by Technicians {0770}
325D and 329D Excavators Engine and Machine Warm-Up
C7 Marine Engines Heat Exchanger - Assemble
G3520B Industrial Engine Electronic Service Tools
C7 Marine Engines Fuel Transfer Pump - Install
2006/02/13 Two Adjustment Gauges Help the Technician Set the Lash for the Variable Valve Actuators {0703, 0763, 1100, 1209}
G3520B Industrial Engine System Configuration Parameters
Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397} Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397}
324D and 326D Excavators Work Tool Control Pedal - If Equipped
G3500 Engines Specifications
G3500 Engines Plate Locations and Film Locations
C11 and C13 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
325D and 329D Excavators Air Conditioning and Heating Control
C7 Marine Engines Injection Actuation Pressure Control Valve - Remove
C7 Marine Engines Injection Actuation Pressure Control Valve - Install