Heat Exchanger - Assemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 221-8647 | Seal Installer Gp | 1 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to install the lip seal. Install regulator (6).
Show/hide table
Illustration 2 g01077652 - Install housing (5).
Show/hide table
Illustration 3 g01077651 - Install core (4).
Show/hide table
Illustration 4 g01077647 - Install plate (3).
Show/hide table
Illustration 5 g01077644 - Install cover (2).
Show/hide table
Illustration 6 g06352702 - Tighten setscrews (1B). Install the washers and nuts (1A).
Show/hide table
Illustration 7 g01077641 - Install cover (1).
Show/hide table
Illustration 1 | g01077655 |
End By:
- Install the heat exchanger. Refer to Disassembly and Assembly, "Heat Exchanger - Install".
Caterpillar Information System:
G3500 Engines Safety Messages
C7 Marine Engines Heat Exchanger - Disassemble
C15 On-Highway Engine Flywheel - Install
C15 On-Highway Engine Flywheel - Remove
C15 On-Highway Engine Engine Oil Pump - Install
C15 On-Highway Engine Engine Oil Pump - Remove
2004/07/01 New Cylinder Head Group {1100}
C7 Marine Engines Oil Cooler (Transmission, Auxiliary) - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Engine Starting
C7 Marine Engines Heat Exchanger - Install
G3520B Industrial Engine Location of Components
Installation of the 254-4334 Check Valve Kit on the 228-5896 Unit Injector Hydraulic Pump Gp and the 228-5898 Unit Injector Hydraulic Pump Gp {1714} Installation of the 254-4334 Check Valve Kit on the 228-5896 Unit Injector Hydraulic Pump Gp and the 228-5898 Unit Injector Hydraulic Pump Gp {1714}
325D and 329D Excavators Engine and Machine Warm-Up
2004/06/28 210-6990 Pressure Gauge (LCD Display, 0 to 500-PSI) Is Available for Use by Technicians {0770}
2004/07/05 243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
G3520B Industrial Engine Electrical Connectors and Functions
3126B Petroleum Engine Event Codes
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
2004/06/01 A New Special Instruction, REHS2259 , "Fabricated Tool for Alternate Method of Tightening Fan Drive Belts" is Available {1357, 1397}
C7 Marine Engines Fuel Priming Pump - Remove and Install
C15 On-highway Engines Housing (Front) - Remove
C15 On-highway Engines Housing (Front) - Install
C7 Marine Engines Fuel Filter Base - Remove and Install
C7 Marine Engines Fuel Transfer Pump - Remove