Flywheel - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7573     | 提升支架     | 2     |
B     | FT2712     | 导向螺柱     | 2     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将工具 (A) 安装到飞轮上。 使用适当的提升装置。 飞轮的重量约为 40 kg (88 lb)。
Show/hide table
图 1 | g01018439 |
- 拆下两个螺栓 (1) 。 安装工具 (B) 。
- 卸下将飞轮固定在曲轴上的其余螺栓 (1) 。 拆下飞轮 (2) 。
- 必要时,利用手锤和冲头将齿圈 (3) 从飞轮上拆下。
Show/hide table
图 2 | g01018440 |
Caterpillar Information System:
C15 On-Highway Engine Engine Oil Pump - Install
C15 On-Highway Engine Engine Oil Pump - Remove
2004/07/01 New Cylinder Head Group {1100}
C7 Marine Engines Oil Cooler (Transmission, Auxiliary) - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Engine Starting
C7 Marine Engines Heat Exchanger - Install
G3520B Industrial Engine Location of Components
Installation of the 254-4334 Check Valve Kit on the 228-5896 Unit Injector Hydraulic Pump Gp and the 228-5898 Unit Injector Hydraulic Pump Gp {1714} Installation of the 254-4334 Check Valve Kit on the 228-5896 Unit Injector Hydraulic Pump Gp and the 228-5898 Unit Injector Hydraulic Pump Gp {1714}
2004/07/05 249-2813 Water Filter Gp is Available for Shop Applications that Require Water Filtration {0699}
G3520B Industrial Engine System Overview
320D Excavator Fuel Tank Water and Sediment - Drain
325D and 329D Excavators Fuel Tank Shutoff and Drain Control
C15 On-Highway Engine Flywheel - Install
C7 Marine Engines Heat Exchanger - Disassemble
G3500 Engines Safety Messages
C7 Marine Engines Heat Exchanger - Assemble
325D and 329D Excavators Engine and Machine Warm-Up
2004/06/28 210-6990 Pressure Gauge (LCD Display, 0 to 500-PSI) Is Available for Use by Technicians {0770}
2004/07/05 243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
G3520B Industrial Engine Electrical Connectors and Functions
3126B Petroleum Engine Event Codes
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
2004/06/01 A New Special Instruction, REHS2259 , "Fabricated Tool for Alternate Method of Tightening Fan Drive Belts" is Available {1357, 1397}
C7 Marine Engines Fuel Priming Pump - Remove and Install