249-2813 Water Filter Gp is Available for Shop Applications that Require Water Filtration {0699}
- Caterpillar Products:
- All
Show/hide table
 | |
| Illustration 1 | g01079099 |
Dealer Service Tools now offers the 249-2813 Water Filter Gp for use in shop applications such as washers or test stands that are cooled by water. The water filter group can be used in any application that requires a water filter. The water filter group has a replaceable 249-2814 Water Filter Element that is available through the Caterpillar Parts Department. A dirt alarm indicates when the water filter element needs to be replaced.
Show/hide table
| Specifications for 249-2813 Water Filter Gp | |
| Maximum operating pressure | 2068 kPa (300 psi) |
| Flow rate | 380 L (100 US gal) |
| Rated fatigue pressure | 1999 kPa (290 psi) |
| Temperature range | -29 to 107°C (-20 to 225 °F) |
| Bypass setting cracking | 207 kPa (30 psi) with full flow at 352 kPa (51 psi) |
| Inlet and outlet ports | 1-1/2 NPTF |
| Dirt alarm | Mechanical pointer |
| Element case | Steel with a protective, internal coating |
| Weight | 5 kg (11 lb) |
| Required clearance for the element | 40 mm (1.6 inch) |
| Element rating | 10 micron, M media |
Caterpillar Information System:
G3520B Industrial Engine System Overview
320D Excavator Fuel Tank Water and Sediment - Drain
325D and 329D Excavators Fuel Tank Shutoff and Drain Control
C7 Marine Engines Heat Exchanger - Remove
C7 Urban Transit Bus Engines Cooling System Coolant Extender (ELC) - Add
G3500 Engines Product Storage
C11 and C13 Petroleum Engines Coolant Conditioner Base
C9 Marine Generator Set Engines Cooling System - Test
C32 Marine Engines CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C32 Marine Engines CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines CID 0174 FMI 04 Fuel Temperature short to ground
C27 and C32 Generator Set Engines CID 0174 FMI 03 Fuel Temperature open/short to +batt
Installation of the 254-4334 Check Valve Kit on the 228-5896 Unit Injector Hydraulic Pump Gp and the 228-5898 Unit Injector Hydraulic Pump Gp {1714} Installation of the 254-4334 Check Valve Kit on the 228-5896 Unit Injector Hydraulic Pump Gp and the 228-5898 Unit Injector Hydraulic Pump Gp {1714}
G3520B Industrial Engine Location of Components
C7 Marine Engines Heat Exchanger - Install
345C MHPU Mobile Hydraulic Power Unit Engine Starting
C7 Marine Engines Oil Cooler (Transmission, Auxiliary) - Remove and Install
2004/07/01 New Cylinder Head Group {1100}
C15 On-Highway Engine Engine Oil Pump - Remove
C15 On-Highway Engine Engine Oil Pump - Install
C15 On-Highway Engine Flywheel - Remove
C15 On-Highway Engine Flywheel - Install
C7 Marine Engines Heat Exchanger - Disassemble
G3500 Engines Safety Messages