CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
Conditions Which Generate This Code:
The voltage level of the 5 volt supply is greater than 5.16 VDC for more than one second.
System Response:
The code is logged. The ECM sets all of the pressure sensors to the respective default values.
Engine power is reduced.
Test Step 1. Perform the following test: Analog Sensor Supply Circuit - Test
Results:
- OK - Stop.
Caterpillar Information System:
C11 and C13 Engines for Caterpillar Built Machines CID 0174 FMI 04 Fuel Temperature short to ground
C27 and C32 Generator Set Engines CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C-10 Petroleum Engine Electronic Unit Injector Sleeve - Remove
C27 and C32 Engines for Caterpillar Built Machines CID 0100 FMI 04 Engine Oil Pressure short to ground
C27 and C32 Engines for Caterpillar Built Machines CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C27 and C32 Engines for Caterpillar Built Machines CID 0094 FMI 04 Fuel Pressure short to ground
C27 and C32 Engines for Caterpillar Built Machines CID 0094 FMI 03 Fuel Pressure open/short to +batt
C-10 Petroleum Engine Fuel Manifold - Install
C-10 Petroleum Engine Fuel Manifold - Remove
C15 On-highway Engines Exhaust Manifold - Remove and Install
C32 Marine Engines CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C9 Marine Generator Set Engines Cooling System - Test
C11 and C13 Petroleum Engines Coolant Conditioner Base
G3500 Engines Product Storage
C7 Urban Transit Bus Engines Cooling System Coolant Extender (ELC) - Add
C7 Marine Engines Heat Exchanger - Remove
325D and 329D Excavators Fuel Tank Shutoff and Drain Control
320D Excavator Fuel Tank Water and Sediment - Drain
G3520B Industrial Engine System Overview
2004/07/05 249-2813 Water Filter Gp is Available for Shop Applications that Require Water Filtration {0699}
Installation of the 254-4334 Check Valve Kit on the 228-5896 Unit Injector Hydraulic Pump Gp and the 228-5898 Unit Injector Hydraulic Pump Gp {1714} Installation of the 254-4334 Check Valve Kit on the 228-5896 Unit Injector Hydraulic Pump Gp and the 228-5898 Unit Injector Hydraulic Pump Gp {1714}
G3520B Industrial Engine Location of Components