C11 and C13 Petroleum Engines Caterpillar


Fan Drive

Usage:

C13 A5K


Illustration 1g03602037

(1) Install the two bearing cones (2) in the hub.

(2) Hand pack the two bearing cups and the two bearing cones with 5 g (0.2 oz) of 2S-3230 Bearing Lubricant prior to assembly.

(3) Install the rear bearing cup in the cone at the hub.

(4) Lightly lubricate the sealing lip of the lip type seal (8) with 2S-3230 Bearing Lubricant.

Note: Install the lip type seal with the lip in the specified position. The lip should be facing toward the front of the engine.

(5) Add 10 g (0.4 oz) of 2S-3230 Bearing Lubricant in the cavity (1) between the two bearing cups.

(6) Install the spacer (7) between the bearing cups.

(7) Install the front bearing cup in the cone at the hub.

(8) Install the spacer on the shaft.

(9) Install the hub assembly on the shaft.

(10) Clean the shaft top end surface and inner diameter for any residual grease.

(11) Install the spring pin (3) in the shaft.

(12) Install plate (6) on the shaft end and spring pin.

Note: Apply 4C-4030 Thread Lock Compound to the threads of the bolt.

(13) Install the washer and bolt (4).

(14) Torque for the bolt ... 115 ± 15 N·m (85 ± 11 lb ft)

(15) Add 30 g (1.1 oz) of 2S-3230 Bearing Lubricant in the fan adapter cavity (5).

(16) Install the adapter with the O-ring seal on the Hub.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.