C13, C15, and C18 Tier 4 Final Engines Caterpillar


Crankshaft

Usage:

826K 232


图 1g01447590
(1) 主轴承颈
(2) 连杆轴承颈

止推片只可用于中央主轴承颈上。

(A) 曲轴齿轮的尺寸

装配后的平均直径 ... 136.20 ± 0.11 mm (5.362 ± 0.004 in)
装配后的最大直径 ... 136.36 mm (5.368 in)

(C) 从定位销顶部至曲轴表面的高度 ... 8.0 ± 0.5 mm (0.31 ± 0.02 in)

注: 装配到缸体中后的曲轴端隙为 0.1 mm (0.004 in)(最小)至 0.5 mm (0.02 in)(最大)。

注: 曲轴齿轮和曲轴之间的间隙不应超过 0.10 mm (0.004 in)

Caterpillar Information System:

3406E, C-10 and C-12 On-highway Engines Ignition Key Switch Circuit and Battery Supply Circuit - Test
C15 and C18 Industrial Engines Fuel Transfer Pump
12M Motor Grader Cutting Edges and End Bits - Inspect/Replace - Includes Overlays
C11 and C13 Industrial Engines Camshaft
C11 and C13 Industrial Engines Camshaft
3512B and 3516B High Displacement Locomotive Engines Engine Mounts - Check
C7 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Pump
12M Motor Grader Circle Top - Lubricate
G3520C and G3520E Generator Set Engines Turbocharger - Assemble - Single Turbocharger
3406E, C-10 and C-12 On-highway Engines PTO Shutdown Timer - Test
G3520C and G3520E Generator Set Engines Turbocharger - Disassemble - Single Turbocharger
C11 and C13 Industrial Engines Engine to Transmission Adapter
Electrical System for All Caterpillar Products Basic Electrical Components
Electrical System for All Caterpillar Products Solid State Electrical Components
Electrical System for All Caterpillar Products Electrical Schematic
G3516B Engines ECM Output Circuit (Starting Motor)
Electrical System for All Caterpillar Products Battery
Electrical System for All Caterpillar Products Charging System
Electrical System for All Caterpillar Products Starting System
325D and 329D Excavators Air Conditioner/Cab Heater Filter (Recirculation) - Inspect/Replace
C-10, C-12, C-15 and C-16 Industrial Engines Flash Codes
12M Motor Grader Kingpin Bearings - Lubricate
G3516B Engines ECM Status Indicator Output
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.