C15 and C18 Industrial Engines Caterpillar


Flywheel Housing

Usage:

C18 GJE


图 1g02565578


图 2g02565636
螺栓拧紧顺序

表 1
技术规格,用于 120-9128 飞轮壳体总成 
项目  数量  零件  技术规格说明 
在装配过程中,检查下列部件上有无任何异物:飞轮壳的前端面、飞轮壳垫片的两侧和缸体的后端面。 这些部件上必须没有以下物质:机油、燃油、水、垫片粘合剂、装配固定胶和任何其他异物。 
在安装油底壳密封垫和油底壳之前,涂抹少量超蓝 Loctite 587 来填充缸体、飞轮壳体和油底壳之间的缝隙。 必须在涂抹超蓝 Loctite 587 的 20 分钟内组装部件。 
按照以下步骤拧紧飞轮壳螺栓: 
5P-8289 螺栓  1. 安装图 2 至 100 ± 20 N·m (74 ± 15 lb ft) 中所示数字顺序拧紧螺栓 (1) 至螺栓 (9)。
2. 按图 2 至 40 ± 10 N·m (30 ± 7 lb ft) 中所示数字顺序拧紧螺栓 (10) 至螺栓 (20)。
3. 按图 2 至 135 ± 20 N·m (100 ± 15 lb ft) 中所示数字顺序再次拧紧螺栓 (1) 至螺栓 (9)。
4. 按图 2 至 55 ± 10 N·m (41 ± 7 lb ft) 中所示数字顺序再次拧紧螺栓 (10) 至螺栓 (20)。 
165-3937 螺栓 
165-3932 螺栓 
3D-2871 锥形锁紧螺柱  拧紧至扭矩为 35 ± 5 N·m (26 ± 4 lb ft)。 

Caterpillar Information System:

12M Motor Grader Centershift Cylinder Socket - Check/Adjust/Replace
C11 and C13 Petroleum Engines Engine Support (Front)
3406E and 3456 Generator Set Engines Flywheel Housing
C-9 Engine for the 330C Excavator and for the 330C Mobile Hydraulic Power Unit Engine Misfires, Runs Rough or Is Unstable
2004/08/01 The Oil Level Gauge (Dipstick) has been Improved {1326}
3176C and 3196 Engines for Caterpillar Built Machines Flywheel
Generator Set Start Module (AC Input) Troubleshooting
Generator Set Start Module (AC Input) Model View Illustrations
3406E, C-10 and C-12 On-highway Engines Engine Speed/Timing Sensor Circuit - Test
Generator Set Start Module (AC Input) Symbols
Generator Set Start Module (AC Input) Acronyms
G3520C and G3520E Generator Set Engines Actuator Bypass Valve (Variable) - Install
12M Motor Grader Centershift Cylinder Socket - Lubricate
12M Motor Grader Circle Drive Pinion Teeth - Lubricate
3406E, C-10 and C-12 On-highway Engines Idle Shutdown Timer - Test
G3520C and G3520E Generator Set Engines Turbocharger - Disassemble - Single Turbocharger
3406E, C-10 and C-12 On-highway Engines PTO Shutdown Timer - Test
G3520C and G3520E Generator Set Engines Turbocharger - Assemble - Single Turbocharger
12M Motor Grader Circle Top - Lubricate
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Pump
C7 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump
3512B and 3516B High Displacement Locomotive Engines Engine Mounts - Check
C11 and C13 Industrial Engines Camshaft
C11 and C13 Industrial Engines Camshaft
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.