2004/08/01 Caterpillar


The Oil Level Gauge (Dipstick) has been Improved {1326}

Usage:

3508 97Y
Engine:
3508 (S/N: 97Y697-698, 700-702, 704-704, 706-706, 708-712, 714-715, 719-722, 726-726, 732-733 and 735-735)

Description of Change: The oil level gauge group (dipstick) has been improved. The previous oil level gauge assembly and oil level tube assembly have been replaced.

Adaptable To:




Illustration 1g01071375

Typical example of the oil level gauge group (dipstick)

The 129-7550 Oil Level Gauge Gp (Dipstick) has been improved for accuracy. A different gauge assembly and tube assembly have been identified for the 129-7550 Oil Level Gauge Gp (Dipstick) .

The 133-7550 Oil Level Gauge As is a direct replacement for the former 129-7549 Oil Level Gauge As within the 129-7550 Oil Level Gauge Gp (Dipstick). The 129-7549 Oil Level Gauge As has been cancelled.

The 133-7544 Oil Level Tube Assembly is a direct replacement for the 7E-0467 Oil Level Tube Assembly within the 129-7550 Oil Level Gauge Gp (Dipstick) .

Note: The 7E-0467 Oil Level Tube Assembly is not cancelled.

Table 1
129-7550 Oil Level Gauge Gp (Dipstick) Parts List    
Part     Old Part Number     New Part Number    
Oil Level Tube As     7E-0467     133-7544    
Gasket     9L-1480    
Bolt     0S-1594    
Hard Washer     5M-2894    
Oil Level Gauge As     129-7549     133-7550    

Caterpillar Information System:

3176C and 3196 Engines for Caterpillar Built Machines Flywheel
Generator Set Start Module (AC Input) Troubleshooting
Generator Set Start Module (AC Input) Model View Illustrations
3406E, C-10 and C-12 On-highway Engines Engine Speed/Timing Sensor Circuit - Test
Generator Set Start Module (AC Input) Symbols
Generator Set Start Module (AC Input) Acronyms
G3520C and G3520E Generator Set Engines Actuator Bypass Valve (Variable) - Install
G3520C and G3520E Generator Set Engines Actuator Bypass Valve (Variable) - Remove
G3520C and G3520E Generator Set Engines Fuel Control Valve - Remove and Install
2004/05/01 UPS Flywheel Bearing Serviceability {7551}
C27 and C32 Engines for Caterpillar Built Machines Turbocharger
G3520C and G3520E Generator Set Engines Throttle Control Valve - Install
C-9 Engine for the 330C Excavator and for the 330C Mobile Hydraulic Power Unit Engine Misfires, Runs Rough or Is Unstable
3406E and 3456 Generator Set Engines Flywheel Housing
C11 and C13 Petroleum Engines Engine Support (Front)
12M Motor Grader Centershift Cylinder Socket - Check/Adjust/Replace
C15 and C18 Industrial Engines Flywheel Housing
12M Motor Grader Centershift Cylinder Socket - Lubricate
12M Motor Grader Circle Drive Pinion Teeth - Lubricate
3406E, C-10 and C-12 On-highway Engines Idle Shutdown Timer - Test
G3520C and G3520E Generator Set Engines Turbocharger - Disassemble - Single Turbocharger
3406E, C-10 and C-12 On-highway Engines PTO Shutdown Timer - Test
G3520C and G3520E Generator Set Engines Turbocharger - Assemble - Single Turbocharger
12M Motor Grader Circle Top - Lubricate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.