C27 and C32 Engines for Caterpillar Built Machines Caterpillar


Turbocharger

Usage:

854K 221


Ilustrasi 1g01434386
Tampak depan engine


Ilustrasi 2g01434384
Tampak atas engine

Catatan: Suplai oli dan lubang saluran pembuangan oli harus berada di posisi vertikal terhadap engine saat grup turbocharger (1) dihubungkan ke manifold buang.

Gunakan prosedur berikut untuk mengencangkan susunan klem kompresor dan susunan klem turbin untuk grup turbocharger:

  1. Kencangkan susunan klem ke 14 ± 1 N·m (125 ± 9 lb in).

  2. Ketuk pelan sekeliling susunan klem dengan hammer berpemukaan lunak.

  3. Kencangkan kembali susunan klem ke 14 ± 1 N·m (125 ± 9 lb in).

Catatan: Berikan Senyawa Anti-Macet 4C-5599 pada ulir enam baut (3).

(2 ) Torsi untuk delapan mur pengunci ... 55 ± 9 N·m (41 ± 7 lb ft)

Caterpillar Information System:

G3520C and G3520E Generator Set Engines Throttle Control Valve - Install
G3520C and G3520E Generator Set Engines Throttle Control Valve - Remove
Generator Set Start Module (AC Input) Safety Signs and Labels
Generator Set Start Module (AC Input) Product Drawings - Internal Schematic
Generator Set Start Module (AC Input) Product Drawings - Interconnection Diagram
Generator Set Start Module (AC Input) Electrical Connections
Generator Set Start Module (AC Input) Mounting
Generator Set Start Module (AC Input) Site Preparation
Generator Set Start Module (AC Input) Specifications
Generator Set Start Module (AC Input) System Description
2004/05/03 Improved Service Meter Used {7478}
3406E, C-10 and C-12 On-highway Engines Engine Temperature Sensor Open or Short Circuit - Test
2004/05/01 UPS Flywheel Bearing Serviceability {7551}
G3520C and G3520E Generator Set Engines Fuel Control Valve - Remove and Install
G3520C and G3520E Generator Set Engines Actuator Bypass Valve (Variable) - Remove
G3520C and G3520E Generator Set Engines Actuator Bypass Valve (Variable) - Install
Generator Set Start Module (AC Input) Acronyms
Generator Set Start Module (AC Input) Symbols
3406E, C-10 and C-12 On-highway Engines Engine Speed/Timing Sensor Circuit - Test
Generator Set Start Module (AC Input) Model View Illustrations
Generator Set Start Module (AC Input) Troubleshooting
3176C and 3196 Engines for Caterpillar Built Machines Flywheel
2004/08/01 The Oil Level Gauge (Dipstick) has been Improved {1326}
C-9 Engine for the 330C Excavator and for the 330C Mobile Hydraulic Power Unit Engine Misfires, Runs Rough or Is Unstable
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.