An Improved Hose Assembly for the Gauge Assembly is Being Used {7454, 7455, 7456}
- Engines:
- G3508 (S/N: 4WD1-UP; 9TG1-UP; 2TJ1-UP)
- G3512 (S/N: 5JD1-UP; 7NJ1-UP; 6JW1-UP)
- G3516 (S/N: 8LD1-UP; 4EK1-UP; 8PW1-UP)
- G3524 (S/N: 7SZ1-UP)
- G3532 (S/N: 8BZ1-UP)
Description of Change: Some hose assemblies for the gauge assemblies have been found in poor condition. The hose assemblies have been soft and spongy because the hose material has appeared to be incompatible with petroleum products. An improved hose assembly for the gauge assembly is being used. The improved hose assemblies utilize the correct hose material for use with oil.
Adaptable To:
Show/hide table
Illustration 1 | g01070619 |
Gauge assembly (1) Hose assembly |
The 2T-1411 Hose As has been replaced by the 153-4809 Hose As in production. Table 1 lists the gauge assemblies that use the new hose assembly. Table 2 lists the engines that are effective in production.
Show/hide table
Gauge Assemblies     | |
Part Number     | Description     |
130-8160     | Coolant Pressure Gauge Gp     |
130-8162     | Water Pressure Differential Gauge Gp     |
130-8164     | Oil Filter Pressure Differential Gauge Gp     |
130-8169     | Pressure Gauge As     |
130-8170     | Pressure Gauge As     |
Show/hide table
Engines in Production     | |
Sales Model     | Effective Serial Number     |
G3508     | S/N:4WD00034-UP     |
S/N:9TG00380-UP | |
S/N:2TJ00179-UP | |
G3512     | S/N:5JD00105-UP     |
S/N:7NJ01054-UP | |
S/N:6JW00129-UP | |
G3516     | S/N:8LD00135-UP     |
S/N:4EK04075-UP | |
S/N:8PW00344-UP | |
G3524     | S/N:7SZ00232-UP     |
G3532     | S/N:8BZ00399-UP     |
Caterpillar Information System:
3406E, C-10 and C-12 On-highway Engines ECM Memory - Test
12M Motor Grader Circle Drive Oil - Change
Electrical System for All Caterpillar Products Circuit Voltage
Electrical System for All Caterpillar Products Electrical Measurement
Electrical System for All Caterpillar Products Ohms Law
Electrical System for All Caterpillar Products Basic Circuit Theory
C27 and C32 Engines for Caterpillar Built Machines Fuel Filter Base
Product Link - PL102C Electronic Service Tool Does Not Communicate with ECM
C7 Petroleum Engines Finding Top Center Position for No. 1 Piston
3500B Marine Propulsion Engines Engine Valve Lash - Inspect/Adjust
3406E and 3456 Generator Set Engines E271 User Defined Switch Active
C15 Petroleum Engines Alternator - Remove and Install
3406E, C-10 and C-12 On-highway Engines Electrical Connectors - Inspect
14L Motor Grader All Wheel Drive Motor Supply Hose - Inspect/Replace - If Equipped
3406E, C-10 and C-12 On-highway Engines Engine Pressure Sensor Open or Short Circuit - Test
2004/05/01 New Turbocharger Supply Lines are Available {1052, 1071}
C11 and C13 Petroleum Engines Flywheel Housing
3406E, C-10 and C-12 On-highway Engines Engine Temperature Sensor Open or Short Circuit - Test
2004/05/03 Improved Service Meter Used {7478}
Generator Set Start Module (AC Input) System Description
Generator Set Start Module (AC Input) Specifications
Generator Set Start Module (AC Input) Site Preparation
Generator Set Start Module (AC Input) Mounting
Generator Set Start Module (AC Input) Electrical Connections