C27 and C32 Industrial and Petroleum Engines Caterpillar


Fuel Transfer Pump

Usage:

C32 B2C


Illustration 1g02592076
(1) Bypass valve
(2) Weep hole
(3) Inlet port
(4) Outlet port

Table 1
Specification for 242-6106 Fuel Transfer Pump Gp 
Item  Qty  Part  Specification Description 
When the fuel transfer pump is using diesel fuel, the fuel transfer pump has the following specifications: 
Run the pump at 2940 rpm. The full bypass pressure should be 716 to 786 kPa (104 to 114 psi).
Run the pump at 840 rpm. The flow at 550 kPa (80 psi) must be 6.0 L/min (1.6 US gpm).
Run the pump at 2940 rpm. The flow at 650 kPa (94 psi) must be 9.00 L/min (2.38 US gpm).
Run the pump at 100 rpm with a blocked inlet for 30 seconds. The pump inlet must have a suction lift of 60.9 kPa (9.0 psi) minimum.

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.