12M Motor Grader Caterpillar


Moldboard Blade

Usage:

12M B92

A tolólap vízszintes beállítása



Illusztráció 1g01068955

  1. Csúsztassa oldalra a tolólapot, a beállítás kívánt irányába.

  2. Eressze le a tolólapot a talajra.

  3. Lazítsa meg azokat a csavarokat, amelyek a henger rúdvégének kengyelét az alakozólaphoz rögzítik. Vegye ki a négy csavart és a négy rugós alátétet.

  4. Állítsa be úgy a hengerrúd helyzetét, hogy a kengyelben lévő válaszfalba szerelt anyák egy vonalban legyenek az alakazólapban lévő alternatív furatokkal.

  5. Tegye be a négy rugós alátétet. Szerelje be, és húzza meg a négy csavart.

Caterpillar Information System:

12M Motor Grader Alternate Exit
3406E and 3456 Generator Set Engines Ether Injection System - Test
3406E and 3456 Generator Set Engines Start Relay Circuit - Test
3406E, C-10 and C-12 On-highway Engines Cruise Control Switch Circuit - Test
Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714} Installation Instructions for the Engine Oil Lines Group for the Hydraulic Electronic Unit Injector (HEUI) Pump{1307, 1714}
12M Motor Grader Fuel System - Prime
C9 Generator Set Engines Engine Oil Pressure Sensor
3406E and 3456 Generator Set Engines Engine Speed/Timing Sensor Circuit - Test
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Turbocharger Outlet Pressure Sensor
Product Link - PL102C General Information
3406E and 3456 Generator Set Engines CID 0460 FMI 13 Filtered Fuel Pressure calibration required
3406E and 3456 Generator Set Engines CID 0460 FMI 04 Filtered Fuel Pressure short to ground
Electrical System for All Caterpillar Products Electricity - How It Works
Electrical System for All Caterpillar Products Magnetism
3406E and 3456 Generator Set Engines Injector Solenoid Circuit - Test
C7 Engines for Caterpillar Built Machines Crankcase Breather
3406E and 3456 Generator Set Engines Engine Pressure Sensor - Calibrate
3406E and 3456 Generator Set Engines Engine Speed/Timing Sensor - Calibrate
2004/05/03 A New Type of Main Bearing is Available {1202, 1203}
3406E and 3456 Generator Set Engines Can Not Reach Top Engine RPM
2013/03/01 A New Type of Main Bearing is Now Used {1203}
2004/05/01 A New Type of Main Bearing Is Now Used {1202, 1203}
3126B Petroleum Engine Engine Speed/Timing Sensor Circuit - Test
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader Low Power/Poor or No Response to Throttle
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.