Gear Pump (Transmission Charging and Scavenge) - Install
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1U-7505 | Hydraulic Jack | 1 |
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Install the gasket and the O-ring to gear pump (11) .
Show/hide table
 | |
| Illustration 1 | g01068397 |
- Use two people and install gear pump (11) . The weight of gear pump (11) is approximately 27 kg (60 lb). Install bolts (10) . Install tube assemblies (9) and install the bolts .
- Install distribution valve (8) . Install bolts (7) . Connect hose assemblies (5) and (6) . Connect hose (4) .
Show/hide table
 | |
| Illustration 2 | g01068392 |
- Install Tooling (A) under guard (1) . Raise guard (1) from links (3) . Install pins (2) . Remove Tooling (A) under guard (1) .
Show/hide table
 | |
| Illustration 3 | g00923138 |
- Fill the power train system with power train oil. Refer to Operation and Maintenance Manual, "Power Train Oil - Check" for the correct procedure.
Caterpillar Information System:
254-0348 Control Gp-Parking Brake (Automatic) Custom Product Support Literature for the R1700G <B>S/N:</B>8XZ1-UP Load Haul Dump{1408, 4250} 254-0348 Control Gp-Parking Brake (Automatic) Custom Product Support Literature for the R1700G <B>S/N:</B>8XZ1-UP Load Haul Dump{1408, 4250}
R2900G Load Haul Dump Power Train Gear Pump (Transmission Charging) - Assemble
AS2251 and AS2301 Screeds Hydraulic Cylinder (Extender Extend) - AS-2251
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Turbocharger Outlet Pressure Sensor
AS2251 and AS2301 Screeds Hydraulic Cylinder (Extender Slope)
16H Motor Grader Power Train Gear Pump (Transmission Charging and Scavenge) - Remove
AS2251 and AS2301 Screeds Height Adjuster Group (Extender)
Product Link - PL102C General Information
Product Link - PL102C Electronic Control Module (ECM) - Replace
8-16B and 10-20B Extend-A-Mat Screed Hydraulic Cylinder (Extender Extend) - Remove and Install
C15 and C18 Generator Set Engines Inlet Air Temperature Sensor - Remove and Install
16H Motor Grader Power Train Transmission Oil Filter Base - Install
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Hydraulic Pedal Control
120M and 12M Motor Graders Cooling System Coolant Level - Check
AP-655C and BG-2255C Asphalt Pavers Machine Systems Piston Pump (Auxiliary) - Install
AS2251 and AS2301 Screeds Hydraulic Cylinder (Extender Extend) - AS-2301
CB-214E, CB-224E and CB-225E Vibratory Compactors Propel System Electrical Schematic
16H Motor Grader Power Train Transmission Control Valve - Remove
AS2251 and AS2301 Front Mounted Screed Screed Plate (Main) - Remove and Install - CWF1-UP
216, 226, 228, 232, 236, 242, 246, 248, 252 and 262 Skid Steer Loaders Reference Material
AP-655C and BG-2255C Asphalt Pavers Machine Systems Chain (Auger Conveyor) - Remove and Install
AP-655C and BG-2255C Asphalt Pavers Machine Systems Chain (Drag Conveyor) - Remove and Install
16H Motor Grader Power Train Transmission Control Valve - Install
12M Motor Grader Fuel System - Fill