Transmission Oil Filter Base - Install
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Position transmission oil filter (6) and the base to the original location. Install bolts (5).
Show/hide table
Illustration 2 g01068299 - Position distribution valve (4) to the original location. Install bolts (3). Connect hose assemblies (2). Connect hose assembly (1).
- Check the oil level in the transmission. Refer to Operation and Maintenance Manual, "Transmission and Differential Oil Level - Check" for the correct procedure.
Show/hide table
| |
| Illustration 1 | g00923387 |
Caterpillar Information System:
16H Motor Grader Power Train Transmission Oil Filter Base - Remove
770 and 772 Off-Highway Truck Frame - Clean/Inspect
770 and 772 Off-Highway Truck Ether Starting Aid Cylinder - Replace
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Bank Valve (Eight) (Mechanically Operated)
TH580B Telehandler Additional Messages
16H Motor Grader Power Train Final Drive - Assemble
2004/04/26 Some Track Roller Frames are No Longer Available {4151}
PF-300C and PS-300C Pneumatic Compactors Machine System Steering Hydraulic System
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Bank Valve (Seven) (Mechanically Operated)
C15 and C18 Generator Set Engines Turbocharger Outlet Pressure Sensor - Remove and Install
16H Motor Grader Power Train Final Drive - Disassemble
924K, 930K, 938K, 950G II, 950H, 950K, 950L, 950M, 950M Z, 962G II, 962H, 962K, 962L, 962M, 962M Z, 966G II, 966H, 966K, 966L, 966M, 966M XE, 972G II, 972H, 972K, 972L, 972M, 972M XE, 980G II, 980H, 980K, 980L, 980M and 982M Wheel Loaders Automatic L General Information
C15 and C18 Generator Set Engines Inlet Air Temperature Sensor - Remove and Install
8-16B and 10-20B Extend-A-Mat Screed Hydraulic Cylinder (Extender Extend) - Remove and Install
Product Link - PL102C Electronic Control Module (ECM) - Replace
Product Link - PL102C General Information
AS2251 and AS2301 Screeds Height Adjuster Group (Extender)
16H Motor Grader Power Train Gear Pump (Transmission Charging and Scavenge) - Remove
AS2251 and AS2301 Screeds Hydraulic Cylinder (Extender Slope)
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Turbocharger Outlet Pressure Sensor
AS2251 and AS2301 Screeds Hydraulic Cylinder (Extender Extend) - AS-2251
R2900G Load Haul Dump Power Train Gear Pump (Transmission Charging) - Assemble
254-0348 Control Gp-Parking Brake (Automatic) Custom Product Support Literature for the R1700G <B>S/N:</B>8XZ1-UP Load Haul Dump{1408, 4250} 254-0348 Control Gp-Parking Brake (Automatic) Custom Product Support Literature for the R1700G <B>S/N:</B>8XZ1-UP Load Haul Dump{1408, 4250}
16H Motor Grader Power Train Gear Pump (Transmission Charging and Scavenge) - Install