C18 Generator set and C18 Marine Engines Caterpillar

Installation Procedure

Show/hide table

Illustration 1	g01066045

1. Position gasket (4) on the front housing.

2. Attach a suitable lifting device to auxiliary water pump (5). The weight of auxiliary water pump (5) is approximately 23 kg (50 lb). Position the auxiliary water pump on the front housing.

3. Install nuts (3).

4. Position the elbow on the auxiliary water pump and install clamp (1). Tighten the clamp to a torque of 20 N·m (15 lb ft). Position the elbow on the auxiliary water pump and install clamp (2). Tighten the clamp to a torque of 20 N·m (15 lb ft).