Flywheel - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Lifting Bracket | 2 |
B | - | Guide Stud (5/8 - 18 x 8 inch) |
2 |
Start By:
- Remove the flywheel adapter. Refer to Disassembly and Assembly, "Flywheel Adapter - Remove and Install".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install Tooling (A) on the flywheel. Use a suitable lifting device. The weight of the flywheel is approximately
35 kg (77 lb) . - Remove two bolts (1). Install Tooling (B).
- Remove remaining bolts (1) that hold the flywheel to the crankshaft . Remove flywheel (2).
Show/hide table
Illustration 2 g01065146 - If necessary, use a hammer and a punch in order to remove ring gear (3) from flywheel (2).
Show/hide table
Illustration 1 | g01065075 |
Caterpillar Information System:
C-15 Petroleum Engine Cooling System - Check - Overheating
G3520C and G3520E Generator Set Engines Auxiliary Water Pump - Assemble
G3520C and G3520E Generator Set Engines Auxiliary Water Pump - Disassemble
G3516B Engines MID 036 - CID 1719 - FMI 04 Generator Output Power Sensor short to ground
G3516B Engines MID 036 - CID 1719 - FMI 03 Generator Output Power Sensor open/short to +batt
3406E, C-10 and C-12 On-highway Engines Check Engine Lamp Circuit - Test
3406E, C-10 and C-12 On-highway Engines Engine Shutdown Output Circuit - Test
2005/04/01 New Injectors and New Flash Files are Now in Production. {1290, 7620}
C15 Petroleum Engines Electronic Control Module - Remove and Install
2004/04/12 Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
3406E, C-10 and C-12 On-highway Engines Engine Running Output Circuit - Test
Product Link - PL102C System Components
C15 Petroleum Engines Flywheel - Install
C18 Industrial Engines Plate Locations and Film Locations
C15 and C18 Industrial Engines Flywheel Adapter - Remove and Install
3126B Marine Engines Analog Sensor Supply Circuit - Test
C-15 Petroleum Engine Vibration Damper - Check
C18 Generator Set Safety Messages
3406E and 3456 Generator Set Engines Analog Sensor Supply Circuit - Test
3406E and 3456 Generator Set Engines CAT Data Link Circuit - Test
2004/05/01 Procedure to Allow Clearance to Install an Eaton VCTplus Clutch {1156}
G3520C and G3520E Generator Set Engines Generator Output Power Readings Do Not Match
3406E and 3456 Generator Set Engines Digital Sensor Supply Circuit - Test
3126B Petroleum Engine Intermittent Engine Shutdown