New Injectors and New Flash Files are Now in Production. {1290, 7620}
- Engine:
- C9 (S/N: 9DG1-999)
New injectors and new flash files are now in production for the C9 On-Highway Truck Engines. The 236-0953 Fuel Injector is being replaced by the 239-6871 Fuel Injector. If it is necessary to replace an injector, then all six injectors need to be replaced. The new injectors are not compatible with the old injectors. The old part numbers will not be supported in the parts system. When you are replacing all six injectors you must install new injector trim files. The engine then needs to be reflashed with the appropriate flash file for that engine. The 252-0028 Software Gp is for the 335 horsepower rating. The 252-0029 Software Gp is for the 350 horsepower rating. The interlock code is 19.
Caterpillar Information System:
C15 Petroleum Engines Electronic Control Module - Remove and Install
2004/04/12 Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
3406E, C-10 and C-12 On-highway Engines Engine Running Output Circuit - Test
Product Link - PL102C System Components
3406E, C-10 and C-12 On-highway Engines Auxiliary Brake Circuit - Test
C9 Urban Transit Bus Engine Turbocharger - Inspect
3406E and 3456 Generator Set Engines Intermittent Engine Shutdown
2004/12/13 Improved Belts and Pulleys are Now Used {1205, 1357, 1425}
C7 Marine Engine Belt Tightener
C15 and C18 Generator Set Engines Fan Drive - Assemble
C15 and C18 Generator Set Engines Fan Drive - Disassemble
C15 and C18 Industrial Engines Fan Drive - Install
3406E, C-10 and C-12 On-highway Engines Engine Shutdown Output Circuit - Test
3406E, C-10 and C-12 On-highway Engines Check Engine Lamp Circuit - Test
G3516B Engines MID 036 - CID 1719 - FMI 03 Generator Output Power Sensor open/short to +batt
G3516B Engines MID 036 - CID 1719 - FMI 04 Generator Output Power Sensor short to ground
G3520C and G3520E Generator Set Engines Auxiliary Water Pump - Disassemble
G3520C and G3520E Generator Set Engines Auxiliary Water Pump - Assemble
C-15 Petroleum Engine Cooling System - Check - Overheating
C15 Petroleum Engines Flywheel - Remove
C15 Petroleum Engines Flywheel - Install
C18 Industrial Engines Plate Locations and Film Locations
C15 and C18 Industrial Engines Flywheel Adapter - Remove and Install
3126B Marine Engines Analog Sensor Supply Circuit - Test