Belt Tightener
Show/hide table
Illustration 1 | g01064397 |
(1) Tighten the bolt for the belt tightener to the following torque. ... 55 ± 10 N·m (40 ± 10 lb ft)
Caterpillar Information System:
C15 and C18 Generator Set Engines Fan Drive - Assemble
C15 and C18 Generator Set Engines Fan Drive - Disassemble
C15 and C18 Industrial Engines Fan Drive - Install
C15 and C18 Industrial Engines Fan Drive - Remove
2004/07/01 Improved Turbocharger Water Lines are Used {1052, 1059, 1380}
3406E and 3456 Generator Set Engines Intermittent Low Power or Power Cutout
3406E and 3456 Generator Set Engines Excessive White Smoke
2004/04/01 Serviceable Parts are Now Available for Water Pumps {1361}
C-15 Petroleum Engine Fuel System Pressure - Test
2004/06/01 Replace the Fuel Injector Hold-Down Bolt When You Service Electronic Unit Injectors {1290}
C9 Urban Transit Bus Engine Air Inlet and Exhaust System
2004/05/01 Use The Correct Stub Shaft For The Crankshaft {1237, 1359}
2004/12/13 Improved Belts and Pulleys are Now Used {1205, 1357, 1425}
3406E and 3456 Generator Set Engines Intermittent Engine Shutdown
C9 Urban Transit Bus Engine Turbocharger - Inspect
3406E, C-10 and C-12 On-highway Engines Auxiliary Brake Circuit - Test
Product Link - PL102C System Components
3406E, C-10 and C-12 On-highway Engines Engine Running Output Circuit - Test
2004/04/12 Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
C15 Petroleum Engines Electronic Control Module - Remove and Install
2005/04/01 New Injectors and New Flash Files are Now in Production. {1290, 7620}
3406E, C-10 and C-12 On-highway Engines Engine Shutdown Output Circuit - Test
3406E, C-10 and C-12 On-highway Engines Check Engine Lamp Circuit - Test
G3516B Engines MID 036 - CID 1719 - FMI 03 Generator Output Power Sensor open/short to +batt