3126B Engine for Caterpillar Built Machines Caterpillar


CID 0006 FMI 11 Cylinder #6 Injector fault

Usage:

120H 124
产生此代码的情况:

电子控制模块(ECM)正尝试运行喷油器。 ECM 监测到喷油器电路中有开路或短路。

如果引起诊断代码的原因是公用线的故障,两个气缸会由于共用喷油器的公用线而受到影响。

系统响应:

ECM 将会记录此诊断代码。 ECM 在记录该代码后还会继续尝试运行喷油器。

存在此情况时喷油器可能无法运行。

  • 发动机缺火

  • 功率过低

测试步骤 1. 进行以下的诊断步骤: 喷油器电磁阀电路 - 测试

结果:

  • 正常 - 停止

Caterpillar Information System:

C15 and C18 Industrial Engines Fuel Filter Base - Assemble
3126B Engine for Caterpillar Built Machines CID 0005 FMI 11 Cylinder #5 Injector fault
C15 and C18 Industrial Engines Fuel Filter Base - Disassemble
3126B Engine for Caterpillar Built Machines CID 0004 FMI 11 Cylinder #4 Injector fault
3126B Engine for Caterpillar Built Machines CID 0003 FMI 11 Cylinder #3 Injector fault
3126B Engine for Caterpillar Built Machines CID 0002 FMI 11 Cylinder #2 Injector fault
3126B Engine for Caterpillar Built Machines CID 0001 FMI 11 Cylinder #1 Injector fault
G3520C and G3520E Generator Set Engines Exhaust Elbow - Remove and Install
3126B Petroleum Engine Installation Environment
2004/04/01 The Heat Exchanger Bonnet can be Rotated on Certain Applications {1379}
3406E, C12, C15 and C18 Marine Engines Flash Codes
C7 Marine Engine Cooling System - Check - Overheating
C15 Petroleum Engines Water Pump - Remove
C-15 Petroleum Engine Troubleshooting
C15 Petroleum Engines Water Pump - Install
3406E, C-10 and C-12 On-highway Engines ATA (SAE J1587 / J1708) Data Link Circuit - Test
C15 and C18 Industrial Engines Belt Tightener - Remove
C15 and C18 Industrial Engines Belt Tightener - Install
C15 and C18 Industrial Engines Belt Tightener - Disassemble
C15 and C18 Industrial Engines Belt Tightener - Assemble
C-15 Petroleum Engine Fuel System - Prime
2004/06/07 Replace the Fuel Injector Hold-Down Bolt When You Service Electronic Unit Injectors {1251, 1290}
2004/05/01 Use The Correct Stub Shaft For The Crankshaft {1237, 1359}
C9 Urban Transit Bus Engine Air Inlet and Exhaust System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.