Special Instruction, REHS2154, "Procedure To Replace The Enclosure Brackets On A 973C Track-Type Loader" is Now Available {7263}
- Track-Type Loader:
- 973C (S/N: 3RZ1-UP)
The Special Instruction, REHS 2154 contains the information that is necessary to replace the brackets for the battery box on a 973C Track-Type Loaderwith stronger brackets. This repair can not be performed in conjunction with Special Instruction, REHS 2209.
This Special Instruction can be obtained through the normal literature ordering channels. The publication is also available on the Caterpillar Service Information System (SIS).
Caterpillar Information System:
C175-16 Locomotive Engine Cooling System Coolant Extender (ELC) - Add
906 and 908 Wheel Loaders Hydraulic and Steering System Pilot Hydraulic System
D10T Track-Type Tractor Power Train Torque Divider
3408E and 3412E Engines for Caterpillar Built Machines Vibration Damper
D10R Track-Type Tractor Maintenance Interval Schedule
826K Landfill Compactor Emissions Warranty Information
950G Series II Wheel Loader Piston Pump
950G Series II Wheel Loader Vane Pump
950G Series II Wheel Loader Gear Pump
950G Series II Wheel Loader Pump Displacement
950G Series II Wheel Loader Hydraulic Pump and Motor Introduction
D6N Track-Type Tractor Engine Starting
525B and 535B Wheel Skidders Machine Systems Hydraulic Rotator - Remove - Standard Rotation Grapple
525B and 535B Wheel Skidders Machine Systems Hydraulic Rotator - Install - Standard Rotation Grapple
992G Wheel Loader Electrohydraulic System Electrical System Schematic
C15 and C18 Engines for Caterpillar Built Machines Vibration Damper - Check
SCJ and 8SC Series Alternators Diode Assembly - Test
992G Wheel Loader Electrohydraulic System Lift and Tilt Cylinder Drift (VIMS) - Check
SCJ and 8SC Series Alternators Regulator - Test
AccuGrade Laser System CB 1 Set Limits Fault
992K Wheel Loader and 854K Wheel Dozer Braking System Pressure Sensor (Service Brake Oil)
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Cab - Remove
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Cab - Install
SCJ and 8SC Series Alternators Residual Magnetism - Restore