AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System Caterpillar


Backup Alarm

Usage:

AD55 ANW

Backup Alarm - The alarm sounds when the shift lever is in the REVERSE position. The alarm alerts the people behind the machine that the machine is backing up.

The backup alarm is on the rear of the machine.



Illustration 1g00038246

A three-position switch is on the rear of the backup alarm. The three positions on the switch are high, low, and medium. The three-position switch regulates the volume of the alarm.

The alarm is set from the factory at the highest sound level.

Caterpillar Information System:

AD30 Underground Articulated Truck Output Transfer Gears - Assemble
950G Series II Wheel Loader Oil Filter
950G Series II Wheel Loader Fluids
D10T Track-Type Tractor Power Train Power Train Oil Pump
2004/03/29 New High Temperature Seals are Available {7555}
992G Wheel Loader and 854G Wheel Dozer Power Train Engagement Pressure for the Lockup Clutch of the Torque Converter (Operator Monitor) - Calibrate
992G Wheel Loader and 854G Wheel Dozer Power Train Impeller Clutch of the Torque Converter (Operator Monitor) - Calibrate
992G Wheel Loader and 854G Wheel Dozer Power Train Position Sensor (Left Brake Pedal) (Operator Monitor) - Calibrate
906 and 908 Wheel Loaders Hydraulic and Steering System Machine Preparation for Troubleshooting
994F Wheel Loader Safety Messages
992G Wheel Loader Electrohydraulic System Position Sensor (Tilt Linkage) - Calibrate
992G Wheel Loader Electrohydraulic System Position Sensor (Lift Linkage) - Calibrate
Achieving a Level Bucket Cutting Edge {6001, 6119, 6801} Achieving a Level Bucket Cutting Edge {6001, 6119, 6801}
2004/04/05 Improved Link Assemblies With New Components Are Now Available {4169, 4171}
D6N Track-Type Tractor Engine Supplement Cooling System Package (Radiator, Aftercooler, Oil Cooler) - Remove
D10T Track-Type Tractor Power Train Transfer and Bevel Gears
992G Wheel Loader Electrohydraulic System Pilot Control Actuator (Proportional Solenoid) - Calibrate
966G II and 972G II Wheel Loaders Lubricant Viscosities
906 and 908 Wheel Loaders Hydraulic and Steering System Operational Checks
C11 and C13 Petroleum Engines Fuel System - Prime
D6N Track-Type Tractor Engine Starting
950G Series II Wheel Loader Hydraulic Pump and Motor Introduction
950G Series II Wheel Loader Pump Displacement
950G Series II Wheel Loader Gear Pump
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.