D11R Track-Type Tractor Caterpillar


Cooling System Coolant Extender (ELC) - Add

Usage:

D11R 9TR

Table 1
Amount of the Caterpillar ELC Extender by Cooling System Capacity    
Cooling System Capacity     Recommended Amount of Caterpillar Extender    

164 to 242 L (43 to 64 US gal)    

4.40 L (148 fl oz)    

When a Caterpillar Extended Life Coolant (ELC) is used, an extender must be added to the cooling system. See the Operation and Maintenance Manual, "Maintenance Interval Schedule" for the proper service interval. The amount of extender is determined by the cooling system capacity.

For additional information about adding an extender, see Operation and Maintenance Manual, "Coolant Recommendations" or consult your Caterpillar dealer.

Use a 8T-5296 Coolant Test Kit to check the concentration of the coolant.

Extended Life Coolant (ELC) Additive




    Illustration 1g00122865

  1. Loosen the radiator cap slowly in order to relieve pressure. Remove the radiator cap.

  1. It may be necessary to drain some coolant from the radiator so that Extender can be added to the cooling system.


    NOTICE

    Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

    Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.

    Dispose of all fluids according to local regulations and mandates.


  1. Add 4.40 L (148 oz) of Extender to the cooling system.



    Illustration 2g00649146

  1. Add coolant in order to maintain the coolant level at the pin (2) that is located internally in the filler tube (1). The pin (2) is the FULL position. Coolant will overflow if you add coolant above FULL.

  1. Maintain the coolant level between the top of the sight glass and the bottom of the filler tube. If you need to add coolant daily, check the cooling system for leaks.

  1. Inspect the radiator cap and the radiator cap seal for debris, for foreign material, or for damage. Clean the radiator cap with a clean cloth. Replace the radiator cap if the radiator cap is damaged.

  1. Install the radiator cap.

Caterpillar Information System:

D10R Track-Type Tractor Bulldozer Tilt Brace
D10T Track-Type Tractor Power Train Transmission Hydraulic Control
Dimensions for the 994 Wheel Loader Hitch{7051, 7054, 7057, 7100} Dimensions for the 994 Wheel Loader Hitch{7051, 7054, 7057, 7100}
D11R Track-Type Tractor Operation Information
D10R Track-Type Tractor Engine Starting with Prelubrication System
988G Wheel Loader Power Train Torque Converter (Lockup) - Assemble
950G Series II Wheel Loader System Components
988G Wheel Loader Power Train Torque Converter (Lockup) - Disassemble
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Accessory Drive (Upper Left Hand)
D11R Track-Type Tractor Bulldozer Blade Control
3408E and 3412E Engines for Caterpillar Built Machines Flash Programming
D11R Track-Type Tractor Daily Inspection
D11R Track-Type Tractor Cooling System Coolant Sample (Level 1) - Obtain
D11R Track-Type Tractor Cooling System Coolant Sample (Level 2) - Obtain
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Pilot Valve - Disassemble
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Pilot Valve - Assemble
D11R Track-Type Tractor Indicators and Gauges - Test
966G II and 972G II Wheel Loaders Autoshift Control
D10R Track-Type Tractor Cooling System Coolant (ELC) - Change
992G Wheel Loader Ether Starting Aid Cylinder - Replace - If Equipped
D10R Track-Type Tractor Engine Valve Lash - Check/Adjust
994F Wheel Loader Fuses - Replace
950G Series II Wheel Loader Hydraulic Tank
2004/04/12 A Tolerance Has Been Added to the Positioning of Lubrication Holes on Lift Arm Pins {6107, 6118}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.