Service Tools
The following service tools should be used to aid in the troubleshooting of the alternator charging system.
Show/hide table
Service Tools     | |
---|---|
Part Number     | Part     |
6V-7070 9U-7330 146-4080     |
Digital Multimeter     |
6V-2150     | Starting and Charging Analyzer     |
9U-5795     | Current Probe     |
225-8266     | Ammeter Tool Gp     |
-     | Variable DC Power Supply 30VDC / 10A     |
Show/hide table
Illustration 1 | g00598763 |
6V-7070 Digital Multimeter |
Show/hide table
Illustration 2 | g00728126 |
9U-7330 Digital Multimeter |
Show/hide table
Illustration 3 | g00728144 |
Variable DC power supply |
Caterpillar Information System:
C-12 Generator Set Engine CID 0268 FMI 02 Check Programmable Parameters
G3300 Engines Cooling System Coolant (NGEC) - Change
2004/05/01 New Water Lines Groups are Used for Venting of the Separate Circuit Aftercooler {1380}
C15 and C18 Engines for Caterpillar Built Machines Flywheel Housing
3406E, C-10 and C-12 On-highway Engines Diagnostic Codes
C15 and C18 Engines for Caterpillar Built Machines Fan Drive
3500B Marine Propulsion Engines Battery - Replace
C15 and C18 Generator Set Engines Electronic Unit Injector - Remove
2006/01/02 Relocation of the Fuel Transfer Pump is Recommended for Certain Applications. {1256}
2004/04/01 Relocation of the Fuel Transfer Pump is Recommended for Certain Applications. {1256}
3406E, C-10, C-12, C-15, C-16 Truck Engines Product Storage
3406E, C-10 and C-12 On-highway Engines Poor Acceleration or Response
SCJ and 8SC Series Alternators Charging System
C-10 and C-15 Petroleum Engines Engine Speed/Timing Sensor Circuit - Test
C18 Generator set and C18 Marine Engines Heat Exchanger - Disassemble - With Fuel Cooler
C18 Generator set and C18 Marine Engines Heat Exchanger - Assemble - Without Fuel Cooler
2004/06/01 Realignment of Air System Components is Recommended. {1063}
C15 Petroleum Engine After Stopping Engine
C-10 and C-15 Petroleum Engines Ether Injection System - Test
G3408 and G3412 Engines Engine Operation
G3408C and G3412C Engines Before Starting Engine
G3408C and G3412C Engines Starting with Jump Start Cables
2004/04/01 An Unknown Diagnostic Fault Code is Displayed on the CAT Electronic Service Tool Display {1901}
G3408C and G3412C Engines Engine Oil Level - Check