980H Wheel Loader Caterpillar


Transmission Oil Filter - Replace

Usage:

980H A8J


注意

在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。

有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。

按照当地法规和要求处置所有液体。


  1. 打开发动机机罩。 变速箱机油滤清器位于机器右侧。


    图 1g01058312

  2. 拆下放油塞 (2),使机油排放到一个合适的容器中。

  3. 用卷带式扳手拆下变速箱滤滤器壳体 (1)。

  4. 拆下旧变速箱机油滤清器滤芯。 用过的滤芯要适当弃置。

  5. 用清洁、不易燃的溶剂清洗变速箱滤清器壳体。 清洁滤清器壳体底座。

  6. 检查滤清器壳体密封。 如果密封损坏,则更换密封件。

  7. 将新变速箱机油滤清器滤芯插入变速箱滤清器壳体中。

  8. 将变速箱滤清器壳体装入滤清器壳体底座中。 用手拧紧变速箱滤清器壳体。 安装螺塞 (2)。

  9. 起动发动机。 接合行车制动器。

  10. 缓慢操作变速箱控制装置,以使变速箱油得以循环。 使变速箱返回至 NEUTRAL(空档)位置。

  11. 接合停车制动器。 检查变速箱机油滤清器有无泄漏。

  12. 关掉发动机。

  13. 检查变速箱油位。 

    参考: 有关正确的程序,请参考操作和维护手册, "变速箱机油油位 - 检查"。

Caterpillar Information System:

D6N Track-Type Tractor Machine Systems Pilot Control Valve - Install
992G Wheel Loader Plate Locations and Film Locations
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Loader Frame and Rear Frame - Connect
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Loader Frame and Rear Frame - Separate
980H Wheel Loader Diagnostic Lines (Remote Pressure Taps) - If Equipped
992G Wheel Loader and 854G Wheel Dozer Power Train MID 081 - CID 0041 - FMI 04
545 Wheel Skidder Machine Systems Hydraulic Rotator - Assemble - Continuous Rotator Grapple
992G Wheel Loader and 854G Wheel Dozer Power Train General Information
950G Series II Wheel Loader Safety
966G II and 972G II Wheel Loaders Aggregate Autodig - If Equipped
2004/03/22 An Unknown Diagnostic Fault Code is Displayed on the CAT Electronic Service Tool Display {1901}
980H Wheel Loader Cooling System Coolant Sample (Level 2) - Obtain
2004/04/12 Internal Changes Improve the Nitrogen Retention of the Accumulators {5077}
980H Wheel Loader Transmission Oil Sample - Obtain
AD30 Underground Articulated Truck Braking System Brake Disc Wear - Check
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System Speed Sensor (Transmission Output) - Replace
992G Wheel Loader Electrohydraulic System Hydraulic Oil Contamination - Test
D6N Track-Type Tractor Machine Systems Pilot Control Valve - Disassemble
2004/04/19 Updated Ejector Lines Group Improves Retention of the Ejector Lines {5057, 6203}
980H Wheel Loader Battery - Clean
AccuGrade Laser System Bank Valve (Grade Control)
AccuGrade Laser System Counterbalance Valve (Grade Control)
AccuGrade Laser System Counterbalance Valve (Grade Control) - Test and Adjust
2004/07/01 A New Screen is Used in the 1L-2073 Pressure Reducing Valve {1462}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.