Pilot Control Valve - Install
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Connect harness assemblies (11) to pilot control valve (9).
Show/hide table
Illustration 2 g01058005 - Position pilot control valve (9). Install screws (10).
Show/hide table
Illustration 3 g01057999 - Install armrest (7) with bolts (8).
Show/hide table
Illustration 4 g01223370 - Connect hose assemblies (6).
Show/hide table
Illustration 5 g01057930 - Install cover assemblies (5).
Show/hide table
Illustration 6 g01223365 - Position cover assembly (1). Connect harness assemblies (4).
Show/hide table
Illustration 7 g01057895 - Install cover assembly (1). Install screws (2). Install insulation (3).
- Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Show/hide table
Illustration 1 | g01058015 |
End By:
- Install the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".
Caterpillar Information System:
992G Wheel Loader Plate Locations and Film Locations
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Loader Frame and Rear Frame - Connect
914G and 914G2 Compact Wheel Loaders and IT14G and IT14G2 Integrated Toolcarriers Machine Systems Loader Frame and Rear Frame - Separate
980H Wheel Loader Diagnostic Lines (Remote Pressure Taps) - If Equipped
992G Wheel Loader and 854G Wheel Dozer Power Train MID 081 - CID 0041 - FMI 04
545 Wheel Skidder Machine Systems Hydraulic Rotator - Assemble - Continuous Rotator Grapple
992G Wheel Loader and 854G Wheel Dozer Power Train General Information
950G Series II Wheel Loader Safety
966G II and 972G II Wheel Loaders Aggregate Autodig - If Equipped
2004/03/22 An Unknown Diagnostic Fault Code is Displayed on the CAT Electronic Service Tool Display {1901}
980H Wheel Loader Cooling System Coolant Sample (Level 2) - Obtain
980H Wheel Loader Cooling System Coolant Sample (Level 1) - Obtain
980H Wheel Loader Transmission Oil Filter - Replace
2004/04/12 Internal Changes Improve the Nitrogen Retention of the Accumulators {5077}
980H Wheel Loader Transmission Oil Sample - Obtain
AD30 Underground Articulated Truck Braking System Brake Disc Wear - Check
AD30 and AD55 Underground Articulated Trucks Power Train Electronic Control System Speed Sensor (Transmission Output) - Replace
992G Wheel Loader Electrohydraulic System Hydraulic Oil Contamination - Test
D6N Track-Type Tractor Machine Systems Pilot Control Valve - Disassemble
2004/04/19 Updated Ejector Lines Group Improves Retention of the Ejector Lines {5057, 6203}
980H Wheel Loader Battery - Clean
AccuGrade Laser System Bank Valve (Grade Control)
AccuGrade Laser System Counterbalance Valve (Grade Control)
AccuGrade Laser System Counterbalance Valve (Grade Control) - Test and Adjust