Fuel Transfer Pump - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 9S-3263 | Thread Lock Compound | - |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install O-ring seal (2) on fuel transfer pump (1). Lubricate the O-ring seal with clean engine oil.
- Put fuel transfer pump (1) in position on front housing (7). Install bolts (3).
- Connect the fuel lines to the fuel transfer pump.
- Install O-ring seal (6) on cover (5). Lubricate the O-ring seal with clean engine oil.
- Put cover (5) in position on front housing (7). Apply Tooling (A) on bolts (4). Install bolts (4) and tighten to a torque of
30 ± 5 N·m (22 ± 4 lb ft) . - Turn the fuel supply to the “ON” position.
- Remove the air from the fuel system. Refer to Testing and Adjusting, "Fuel System - Prime".
Show/hide table
Illustration 1 | g01056980 |
Caterpillar Information System:
C18 Generator set and C18 Marine Engines Fuel Transfer Pump - Remove
3126B Petroleum Engine Engine Crankcase Pressure (Blowby) - Test
G3600 Engines Crankshaft Vibration Damper - Inspect
C13, C15, and C18 Generator Set Engines Ether Injection System - Test
G3300 Engines Gas Pressure Regulator - Check
3412E Petroleum Engine System Configuration Parameters
C15 and C18 Petrolem Generator Set Engines Switch Circuits - Test
C-15 Petroleum Engine Turbocharger
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Temperature Sensor - If Equipped
C9 On-Highway Truck Engines Modulating Valve - Remove and Install
Center Steering Arm Straight Bore Inspection and Salvage Procedure for Off-Highway Trucks {4305} Center Steering Arm Straight Bore Inspection and Salvage Procedure for Off-Highway Trucks {4305}
C7 On-Highway Engine Modulating Valve - Remove and Install
3126B Petroleum Engine Belt Tension Chart
G3300 Engines Engine - Clean
G3520C and G3520E Engines Thermostatic Valve
G3600 Engines Cooling System Coolant Level - Check
2004/03/01 Listing of Deutsch Connector Components {7553}
C18 Petroleum Generator Sets Engine Description
G3520C and G3520E Engines Thermostatic Valve
3126B Petroleum Engine Water Temperature Regulator
C13, C15, and C18 Generator Set Engines Engine Shutdown Switch Circuit - Test
2004/05/01 New Piston For Marine Auxiliary And Industrial Engines Reduces Light Load Oil Consumption {1214}
C13, C15, and C18 Generator Set Engines Digital Sensor Supply Circuit - Test
3406E, C-10 and C-12 On-highway Engines System Overview