Fuel Transfer Pump - Remove
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Turn the fuel supply to the “OFF” position.
Show/hide table
Illustration 1 g01056980 - Disconnect the fuel lines from fuel transfer pump (1).
- Remove bolts (3).
- Remove fuel transfer pump (1) from front housing (7). Remove O-ring seal (2) from the fuel transfer pump.
- Remove bolts (4). Remove cover (5) from the front housing. Remove O-ring seal (6) from the cover.
Caterpillar Information System:
3126B Petroleum Engine Engine Crankcase Pressure (Blowby) - Test
G3600 Engines Crankshaft Vibration Damper - Inspect
C13, C15, and C18 Generator Set Engines Ether Injection System - Test
G3300 Engines Gas Pressure Regulator - Check
3412E Petroleum Engine System Configuration Parameters
C15 and C18 Petrolem Generator Set Engines Switch Circuits - Test
C-15 Petroleum Engine Turbocharger
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Temperature Sensor - If Equipped
C9 On-Highway Truck Engines Modulating Valve - Remove and Install
Center Steering Arm Straight Bore Inspection and Salvage Procedure for Off-Highway Trucks {4305} Center Steering Arm Straight Bore Inspection and Salvage Procedure for Off-Highway Trucks {4305}
C7 On-Highway Engine Modulating Valve - Remove and Install
C13, C15, and C18 Generator Set Engines Injector Solenoid Circuit - Test
C18 Generator set and C18 Marine Engines Fuel Transfer Pump - Install
3126B Petroleum Engine Belt Tension Chart
G3300 Engines Engine - Clean
G3520C and G3520E Engines Thermostatic Valve
G3600 Engines Cooling System Coolant Level - Check
2004/03/01 Listing of Deutsch Connector Components {7553}
C18 Petroleum Generator Sets Engine Description
G3520C and G3520E Engines Thermostatic Valve
3126B Petroleum Engine Water Temperature Regulator
C13, C15, and C18 Generator Set Engines Engine Shutdown Switch Circuit - Test
2004/05/01 New Piston For Marine Auxiliary And Industrial Engines Reduces Light Load Oil Consumption {1214}
C13, C15, and C18 Generator Set Engines Digital Sensor Supply Circuit - Test