A Parts Kit for the Piston Cooling Jets and Retainers for the Piston Cooling Jets is Now Cancelled {1331}
- Caterpillar Products:
- 3500 Family Pumpers
- 3500 and 3500B Family Generator Sets and Power Modules with Standard Displacement
- Engine: Commercial
- 3500 and 3500B Engines with Standard Displacement
Reference: Engine News, SEBD9327, November 2003, "Introduction of New Pistons and Remanufactured Cylinder Packs"
Reference: Special Instruction, REHS2061, "Install the Correct Piston Cooling Jet and the Correct Retainer for the New One Piece Pistons"
A parts kit for the piston cooling jets and retainers for the piston cooling jets is now cancelled.
The 252-5143 Piston Cooling Jet Gp is now cancelled. The kit contained four 204-5447 Piston Cooling Jet As, and four 193-3282 Retainer As.
The 204-5447 Piston Cooling Jet As and the 193-3282 Retainer As can be ordered separately.
Caterpillar Information System:
3508B, 3512B, and 3516B High Displacement Generator Sets Safety Messages
C13, C15, and C18 Generator Set Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
C7 Marine Engine Inlet Manifold Pressure - Test
G3520E Generator Set Engines Camshaft
3412E Petroleum Engine Electrical System
2004/04/01 The Procedure for the Installation of the Electronic Unit Injector Has Changed {1290}
Reuse and Salvage Guideline for Front Suspension Cylinder Housings and Heads on Off-Highway Trucks {0374, 0599, 7201} Reuse and Salvage Guideline for Front Suspension Cylinder Housings and Heads on Off-Highway Trucks {0374, 0599, 7201}
C7 Marine Engine Cooling System - Test
2004/02/01 Updated ECM Software is Now Available for the Input Switch on the Air Conditioner Controls {7620}
2009/08/24 Calibration for the Engine Oil Level Gauge {1326}
C13, C15, and C18 Generator Set Engines Diagnostic Codes
C13, C15, and C18 Generator Set Engines CID 0175 FMI 04 Engine Oil Temperature short to ground
2004/03/01 Correct Installation of the Oil Drain Lines for the Center Mounted Turbochargers {1052, 1307}
3412E Petroleum Engine Installation Environment
3412E Petroleum Engine Safety Messages
3412E Petroleum Engine Engine Description
3412E Petroleum Engine Plate Locations and Film Locations
C11 and C13 Petroleum Engines Product Lifting
3412E Petroleum Engine Diagnostic Flash Code Retrieval
3412E Petroleum Engine Refill Capacities and Recommendations
C32 Power Module Cooling System Coolant (DEAC) - Change
2004/04/01 The Procedure for the Removal of the Electronic Unit Injector has Changed {1290}
C11 and C13 Petroleum Engines Cooling System Coolant (ELC) - Change
C-10 Petroleum Engine Electrical System