Calibration for the Engine Oil Level Gauge {1326}
- Generator Set:
- C18 MARINE GS (S/N: CYN1-UP)
- Marine Engine:
- C18 MARINE (S/N: CKH1-UP)
- C9 MARINE GS (S/N: SJB1-UP; C9A1-UP; C9J1-UP)
- C9 MARINE (S/N: C9B1-UP; CSN1-UP; X9X1-UP; Z9X1-UP)
Refer to the appropriate Operation and Maintenance Manual for your engine in order to perform this procedure.
Caterpillar Information System:
C13, C15, and C18 Generator Set Engines Diagnostic Codes
C13, C15, and C18 Generator Set Engines CID 0175 FMI 04 Engine Oil Temperature short to ground
C13, C15, and C18 Generator Set Engines CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
G3516C and G3516E Gas Engines Engine Design
2004/05/01 Improved Water Temperature Regulator {1355}
C-15 Petroleum Engine Cooling System
2004/04/01 Replacement of the Injection Actuation Pressure Control Valve {5051}
D7G Series 2 and D7G Series II Track-Type Tractors Horn - Test
G3408 and G3412 Engines Engine Oil and Filter - Change
EMCP3 Voltage and Frequency Adjustment
G3516B Engines MID 036 - CID 1719 - FMI 12 Generator Output Power Sensor malfunction
C12 Marine Engines Engine Oil Level Gauge - Calibrate
2004/02/01 Updated ECM Software is Now Available for the Input Switch on the Air Conditioner Controls {7620}
C7 Marine Engine Cooling System - Test
Reuse and Salvage Guideline for Front Suspension Cylinder Housings and Heads on Off-Highway Trucks {0374, 0599, 7201} Reuse and Salvage Guideline for Front Suspension Cylinder Housings and Heads on Off-Highway Trucks {0374, 0599, 7201}
2004/04/01 The Procedure for the Installation of the Electronic Unit Injector Has Changed {1290}
3412E Petroleum Engine Electrical System
G3520E Generator Set Engines Camshaft
C7 Marine Engine Inlet Manifold Pressure - Test
C13, C15, and C18 Generator Set Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
3508B, 3512B, and 3516B High Displacement Generator Sets Safety Messages
2005/06/20 A Parts Kit for the Piston Cooling Jets and Retainers for the Piston Cooling Jets is Now Cancelled {1331}
2004/03/01 Correct Installation of the Oil Drain Lines for the Center Mounted Turbochargers {1052, 1307}
3412E Petroleum Engine Installation Environment