Improved Water Temperature Regulator {1355}
- Industrial Engines:
- 3034 (S/N: 7EF1-UP; CPP1-UP)
- 3054 (S/N: 4ZK1-UP; 6FK1-UP; 6NR1-UP; 5YS1-UP)
- 3056 (S/N: 1ML1-UP; 3GW1-UP; 7AK1-UP)
A new 251-9336 Water Temperature Regulator has been released for the Industrial Engines that are listed above. The new 251-9336 Water Temperature Regulator is a direct replacement for the previous 4W-8063 Water Temperature Regulator. The material for the bridge on the previous 4W-8063 Water Temperature Regulator was manufactured from brass. The material for the bridge on the new 251-9336 Water Temperature Regulator is manufactured from stainless steel, which will improve the resistance to corrosion and to cracking from stress.
Caterpillar Information System:
C-15 Petroleum Engine Cooling System
2004/04/01 Replacement of the Injection Actuation Pressure Control Valve {5051}
D7G Series 2 and D7G Series II Track-Type Tractors Horn - Test
G3408 and G3412 Engines Engine Oil and Filter - Change
EMCP3 Voltage and Frequency Adjustment
G3516B Engines MID 036 - CID 1719 - FMI 12 Generator Output Power Sensor malfunction
C12 Marine Engines Engine Oil Level Gauge - Calibrate
3126B Marine Engines Injection Actuation Pressure Sensor - Test
C13, C15, and C18 Generator Set Engines System Configuration Parameters
3126B Petroleum Engine Belt Tensioner - Inspect
C11 and C13 Petroleum Engines Fan Drive Bearing - Replace
G3516B Engines MID 036 - CID 0145 - FMI 04 12 Volt DC Power Supply short to ground
G3516C and G3516E Gas Engines Engine Design
C13, C15, and C18 Generator Set Engines CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C13, C15, and C18 Generator Set Engines CID 0175 FMI 04 Engine Oil Temperature short to ground
C13, C15, and C18 Generator Set Engines Diagnostic Codes
2009/08/24 Calibration for the Engine Oil Level Gauge {1326}
2004/02/01 Updated ECM Software is Now Available for the Input Switch on the Air Conditioner Controls {7620}
C7 Marine Engine Cooling System - Test
Reuse and Salvage Guideline for Front Suspension Cylinder Housings and Heads on Off-Highway Trucks {0374, 0599, 7201} Reuse and Salvage Guideline for Front Suspension Cylinder Housings and Heads on Off-Highway Trucks {0374, 0599, 7201}
2004/04/01 The Procedure for the Installation of the Electronic Unit Injector Has Changed {1290}
3412E Petroleum Engine Electrical System
G3520E Generator Set Engines Camshaft
C7 Marine Engine Inlet Manifold Pressure - Test