3612 and 3616 Fast Vessel Engines Caterpillar


Cooling System Coolant Sample (Level 2) - Obtain

Usage:

3616 1FN


注意

必须分别使用专用的机油采样泵和冷却液采样泵。 使用同一个泵去进行两种液体的采样会污染抽取的液样。 这种污染可能会导致代理商和客户关注由此造成错误的分析和不正确的解释。


对冷却液进行采样的时间应尽可能接近推荐的采样间隔。 从卡特彼勒代理商处获得采样所需的器具。

有关冷却液的正确取样的准则,请参阅操作和保养手册, "冷却系统冷却液液样(1级) - 取样"。

呈交液样进行 2 级分析。

有关冷却液分析的更多信息,请参阅本操作和保养手册, "再加注容量和建议"。

Caterpillar Information System:

3612 and 3616 Fast Vessel Engines Cooling System Coolant Sample (Level 1) - Obtain
2004/02/01 New Flash Files Are Now Available For The On-Highway Truck Engines. {7620}
3126B Petroleum Engine Fuel Transfer Pump
C-10 Petroleum Engine Engine Oil Cooler
3126B Marine Engines Injector Solenoid Circuit - Test
3126B Marine Engines Engine Temperature Sensor Open or Short Circuit - Test
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Interface Board - Remove and Install - User Interface Board
G3600 Engines Engine Oil - Change
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Interface Board - Remove and Install - Static Switch Interface Board
C7 Marine Engine Air Inlet and Exhaust System - Inspect
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Interface Board - Remove and Install - Flywheel Interface Board
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Interface Board - Remove and Install - DC Interface Board
2004/02/01 The Piston Pin Retainer Is Now Marked for Correct Orientation {1214}
3612 and 3616 Fast Vessel Engines Overhaul (Major)
C-15 Petroleum Engine Installation Environment
2004/04/19 The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785}
3612 and 3616 Fast Vessel Engines Overhaul (Top End)
SCJ and 8SC Series Alternators Alternator
C7 Marine Engine Gear Group (Front) - Time
C-15 Petroleum Engine General Information
3500B and 3500C Marine Engines Exhaust Manifold
C-10 Petroleum Engine Engine Design
3500B and 3500C Marine Engines Exhaust Manifold
2004/03/01 An Improved Locknut for the Turbocharger Mounting Stud is Now Used {1052}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.