Engine Oil Cooler
Show/hide table
Illustration 1 | g01090846 |
(1) Apply 5P-3413 Pipe Sealant to the plug threads.
(2) Water pump
(3) Core assembly
Show/hide table
Illustration 2 | g00534638 |
Section A-A |
(4) Install the hose clamps at the following angle. ... 30 ± 5 degrees
Show/hide table
Illustration 3 | g01090856 |
(5) Core assembly
Show/hide table
Illustration 4 | g00534649 |
Detail B |
The oil flow rate through the cooler assembly is 60.6 L/min (16 US gpm). The maximum water flow through the cooler assembly is 227.4 L/min (60 US gpm).
Lubricate the core with engine oil. Press the core into the housing to the following dimensions at both ends.
(6) The depth of the plate is the following value. ... 4.0 ± 0.5 mm (0.16 ± 0.02 inch)
(7) The depth of the tube is the following value. ... 1.5 ± 0.5 mm (0.06 ± 0.02 inch)
Caterpillar Information System:
3126B Marine Engines Injector Solenoid Circuit - Test
3126B Marine Engines Engine Temperature Sensor Open or Short Circuit - Test
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Interface Board - Remove and Install - User Interface Board
G3600 Engines Engine Oil - Change
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Interface Board - Remove and Install - Static Switch Interface Board
C7 Marine Engine Air Inlet and Exhaust System - Inspect
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Interface Board - Remove and Install - Flywheel Interface Board
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Interface Board - Remove and Install - DC Interface Board
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Interface Board - Remove and Install - AC Interface Board
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply Interface Board - Remove and Install - Parallel Cabinet Interface
G3612 and G3616 Engines Electrohydraulic System Oil Filter - Change
C18 Generator set and C18 Marine Engines Fuel Manifold - Install
3126B Petroleum Engine Fuel Transfer Pump
2004/02/01 New Flash Files Are Now Available For The On-Highway Truck Engines. {7620}
3612 and 3616 Fast Vessel Engines Cooling System Coolant Sample (Level 1) - Obtain
3612 and 3616 Fast Vessel Engines Cooling System Coolant Sample (Level 2) - Obtain
2004/02/01 The Piston Pin Retainer Is Now Marked for Correct Orientation {1214}
3612 and 3616 Fast Vessel Engines Overhaul (Major)
C-15 Petroleum Engine Installation Environment
2004/04/19 The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785}
3612 and 3616 Fast Vessel Engines Overhaul (Top End)
SCJ and 8SC Series Alternators Alternator
C7 Marine Engine Gear Group (Front) - Time
C-15 Petroleum Engine General Information