Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
- Caterpillar Products:
- All
Show/hide table
 | |
| Illustration 1 | g01045955 |
(1) 229-7259 Filter Head (Single) (2) 229-7261 Filter Head (Quadruple) (3) 229-7260 Filter Head (Double) | |
Seven filter heads that have capacities from 300 L/min (79 US gpm) to 450 L/min (119 US gpm) allow dealers to build custom hydraulic oil filtering systems. The heads can be use in a variety of applications from hydraulic filter carts to permanent tank installations. The filter heads are sized to use from one, two, or four filter elements. Some of the heads are available with indicators in order to alert the operator when the elements need to be replaced.
Features and Benefits
- The filter heads attach to a variety of filter tools, using either pipe threads or four bolt flanges.
- The units can be permanently attached, or the units can use quick disconnects for maximum flexibility.
- All of the filter heads are manufactured from lightweight, cast aluminum for strength and durability.
Show/hide table
| Specifications | ||||
| Pt. No. | Bypass Pressure | Maximum Flow | Ports | Filter Indicator |
| Single Element Filter Heads | ||||
| 9U-6989 | 170 kPa (25 psi) |
300 L/min (79 US gpm) |
1-1/2 inch NPT | No |
| 229-7259 | None | 300 L/min (79 US gpm) |
1-1/2 inch NPT | No |
| Double Element Filter Heads | ||||
| 9U-6991 | 170 kPa (25 psi) |
450 L/min (119 US gpm) |
1-7/8 inch SAE | No |
| 229-7260 | None | 450 L/min (119 US gpm) |
1-1/2 inch NPT and 51 mm (2 inch) four bolt flange | Yes |
| 140-7971 | 170 kPa (25 psi) |
450 L/min (119 US gpm) |
1-1/2 inch NPT and 51 mm (2 inch) four bolt flange | Yes |
| Quadruple Element Filter Heads | ||||
| 9U-5970 (1) | 170 kPa (25 psi) |
450 L/min (119 US gpm) |
1-1/2 inch NPT | Yes |
| 229-7261 | None | 450 L/min (119 US gpm) |
1-1/2 inch NPT | Yes |
Show/hide table
| ( 1 ) | Comes with four 25 micron elements |
Show/hide table
 | |
| Illustration 2 | g01046130 |
Show/hide table
| Filter Element Options | |
| Pt. No. | Description |
| 198-3188 | 2 Micron |
| 9U-6983 | 5 Micron |
| 9U-5870 | 10 Micron |
| 9U-6984 | 15 Micron |
| 188-7027 | 25 Micron with water separator |
| 9U-6985 | 149 Micron (100 mesh) |
Caterpillar Information System:
C7 Marine Engine Engine Oil Pan
2004/05/01 Tools Released for the Removal and the Installation of the Camshaft and the Camshaft Bearings {0700, 0701, 0705}
C15 and C18 Generator Set Engines Valve Mechanism Cover Base - Remove and Install
C15 and C18 Industrial Engines Valve Mechanism Cover - Remove and Install
G3500 Engines Engine Crankcase Pressure (Blowby) - Test
2004/02/01 Improved Gasket for the Rear Crankshaft Seal Carrier {1161}
2004/02/16 Tool Released for Installing Contact Strips for the Charge Drain within the Flywheel Assembly {0785}
G3500 Engines Engine Speed Sensor - Adjust
C7 Marine Engine Gear Group (Front)
C13, C15, and C18 Generator Set Engines Poor Acceleration or Response
C18 Marine Auxiliary Engines Low Power/Poor or No Response to Throttle
2004/02/16 Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
C-10, C-12, C-15 and C-16 Industrial Engines Excessive White Smoke
2004/04/01 Digital Multimeter Group (Clamp on) Rated at 2000 Amps Available for Electric Power Generation Applications {0709, 0785}
C12 Marine Engines Engine Air Cleaner Service Indicator - Inspect
C12 Marine Engines Engine Crankcase Breather - Clean
G3500 Engines Engine Oil Level Regulator
C7 Marine Engine Flywheel Housing
2004/11/01 Improved Fan Drives are Used {1359}
G3500 Engines Crankcase Breather
C15 and C18 Engines for Caterpillar Built Machines Housing (Front) - Remove
C15 and C18 Engines for Caterpillar Built Machines Housing (Front) - Install
C7 Marine Engine Fuel Filter Base
G3500 Engines Fumes Disposal System