311C-330C, 345B Series II, 365B and 385B Excavators Caterpillar

Fuel Tank Shutoff and Drain Control

Usage:

322C ADX

Katup pembuangan tangki bahan bakar terletak di bawah pompa hidrolik utama. Katup penghentian aliran bahan bakar terletak di bawah tangki bahan bakar.

Show/hide table




Ilustrasi 1	g01043694
Katup pembuangan tangki bahan bakar

Show/hide table




Ilustrasi 2	g01043693
Katup penghentian aliran bahan bakar

Katup Pembuangan Tangki Bahan Bakar - Untuk membuang air dan sedimen dari tangki bahan bakar, putar katup pembuangan tangki bahan bakar berlawanan arah jarum jam. Untuk menutup katup pembuangan tangki bahan bakar, putar katup pembuangan searah jarum jam.

Katup Penghentian Aliran Bahan Bakar - Untuk menghentikan aliran bahan bakar, putar katup penghentian aliran bahan bakar searah jarum jam. Untuk mengalirkan bahan bakar, putar katup penghentian aliran bahan bakar berlawanan arah jarum jam.

Catatan: Untuk mendapatkan informasi lebih terperinci yang berhubungan dengan pembuangan air dan sedimen dari tangki bahan bakar, gunakan petunjuk pada Buku Petunjuk Pengoperasian dan Perawatan, "Air dan Sedimen Tangki Bahan Bakar - Buang"

Caterpillar Information System:

C15 and C18 Generator Set Engines Inlet and Exhaust Valve Springs - Remove and Install

2004/03/29 Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}

307C Excavator Lifting Capacities

A19B and A26B Augers Auger Planetary - Assemble

C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pump - Install

A19B and A26B Augers Auger Planetary - Disassemble

3524B Engines for 797 and 797B Off-Highway Trucks Cold Mode Operation

A19B and A26B Augers Gerotor Motor - Install

A19B and A26B Augers Gerotor Motor - Remove

A19B and A26B Augers Auger Planetary and Gerotor Motor - Install

A19B and A26B Augers Auger Planetary and Gerotor Motor - Remove

C15 and C18 Engines for Caterpillar Built Machines Engine Oil Pump - Remove

Conversion of High Flow Work Tools For Operation on High Flow Skid Steer Loaders and Multi Terrain Loaders{1408, 5057, 7553} Conversion of High Flow Work Tools For Operation on High Flow Skid Steer Loaders and Multi Terrain Loaders{1408, 5057, 7553}

325C Forest Machines Machine Systems Swing Drive - Remove

A19B and A26B Augers Mounting Bracket - Remove and Install

C15 and C18 Generator Set Engines Inlet and Exhaust Valves - Remove and Install

311C-330C, 345B Series II, 365B and 385B Excavators Fuel Tank Water and Sediment - Drain

2004/02/16 Track Roller Groups (Heavy Duty) are Available {4180}

2003/12/29 A New Torque Specification Is Now Used For The Fitting Assembly In The Pilot Lines Group {5057, 5059}

C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Remove - If Equipped

C15 and C18 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO) - Install - If Equipped

M325D and M330D Excavators Power Train Electronic Control System General Information

325C Material Handler Maintenance Interval Schedule

311C-330C, 345B Series II, 365B and 385B Excavators Stopping the Engine