C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Fuel Filter Base - Remove

Usage:

631E 1AB

拆卸步骤

表 1
需要的工具 
工具  零件号  零件名称  数量 
185-3630  皮带扳手 


注意

在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。

有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。

按照当地法规和要求处置所有液体。



注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。


  1. 将供油开关置于“OFF”位置。


    图 1g01041315

  2. 从燃油滤清器底座 (4) 上断开软管组件 (1) 和软管组件 (3)。

  3. 使用工具 (A),从燃油滤清器底座 (4) 上拆卸燃油滤清器 (5)。

  4. 拆卸螺栓 (2)。 拆卸燃油滤清器底座 (4)。

Caterpillar Information System:

2003/12/01 New Injectors and New Flash Files are Now in Production {1290, 7620}
G3500 Engines Control Panel
C9 Marine Auxiliary and Marine Generator Set Engines Analog Sensor Supply Circuit - Test
C1.5 and C2.2 Generator Sets Reference Material
C18 Generator Sets Generator Set - Test
C27 and C32 Generator Set Engines E264 Emergency Stop Activated
C13, C15, and C18 Generator Set Engines E255 Diagnostic Reset
3406E Engine Engine Oil Filter Base - Assemble - Engine with BrakeSaver
3406E Engine Engine Oil Filter Base - Disassemble - Engine with BrakeSaver
3406E Engine Engine Oil Filter Base - Install - Engine with BrakeSaver
3406E Engine Engine Oil Filter Base - Remove - Engine with BrakeSaver
C1.5 and C2.2 Generator Sets Refill Capacities and Recommendations
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter Base - Install
G3500 Engines Prelube Pump
2003/12/01 The Function of Monitoring the Aftercooler Coolant Level on Certain Gas Generator Sets Has Changed {1063, 1395}
C15 and C18 Industrial Engines Fuel Transfer Pump - Remove
C15 and C18 Industrial Engines Fuel Transfer Pump - Install
Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408} Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408}
2004/01/01 A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2003/12/01 A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2003/12/15 A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
EMCP3 Annunciator Module
C-15 Petroleum Engine Electronic Unit Injector Rocker Arm
3054E Industrial Engine Engine Oil Pressure - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.