Gear Group (Front) - Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 1P-0510 | 冲头总成 | 1 |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将惰轮组件 (9) 和挡板 (8) 安装到机油泵上。 安装螺栓 (7)。
- 检查齿轮组件的端隙。 齿轮组件的端隙为
0.05 到 0.35 mm (0.002 到 0.014 in) 。 - 使用工具 (A) 将轴承 (5) 安装到惰轮组件 (3) 中。
- 将惰轮组件上的正时标记与凸轮轴齿轮和曲轴齿轮上的小孔对齐。 将止推盘 (1)、惰轮轴 (2)、惰轮组件 (3) 和挡板 (6) 安装到缸体上。 安装螺栓 (4),并拧紧至扭矩为
70 ± 15 N·m (52 ± 11 lb ft) 。 - 标定转速/正时传感器。 有关标定步骤,请参阅故障诊断与排除, "发动机转速/正时传感器 - 标定"。
Show/hide table
图 1 | g01272583 |
结束:
- 安装前壳体。 请参阅拆解和组装, "壳体(前) - 安装"。
Caterpillar Information System:
C7 PETROLEUM Petroleum Engine Gear Group (Front) - Remove
C15 Petroleum Generator Set Engines Water Pump - Test
C15 Petroleum Generator Set Engines Electronic Unit Injector - Test
Oil Renewal System Troubleshooting
C9 Marine Engines and C9 Marine Generator Sets Fuel Pressure Regulator - Remove and Install
2003/11/01 Improved Remanufactured Electric Starting Motors are Now Available {1453}
G3500 Engines Electronic Service Tools
G3500 Engines Electrical Connectors and Functions
C9 Marine Engines and C9 Marine Generator Sets Fuel Cooler - Remove and Install
EMCP3 Data Link
C32 Marine Engine Crankshaft
C18 Generator set and C18 Marine Engines Rocker Arm and Shaft - Install
G3500 Engines Engine Monitoring System
2003/11/01 The Air Shutoff Has Been Improved {1078}
C15 and C18 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
C15 Petroleum Generator Set Engines Lubrication System
C15 and C18 Engines for Caterpillar Built Machines Cooling System
C32 Marine Engine Piston and Rings
2003/12/01 A Turbine Type Air Starting Motor Is Now Used on the 3618 Engines {1451}
Electronic Installation Guide{1900} Electronic Installation Guide{1900}
Federal Emissions Warranty Information Federal Emission Control Warranty
G3500 Engines Programming Parameters
3408E and 3412E Engines for Caterpillar Built Machines Gear Group (Front)
C32 Marine Engine Flywheel