Rocker Arm and Shaft - Install
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 124-2946 | Lifting Bracket | 1 |
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install rocker arms and shaft (2) with Tooling (A) .
Note: Install rocker arms and shaft (2) with the flat side facing upward.
Show/hide table
 | |
| Illustration 1 | g01033395 |
Show/hide table
 | |
| Illustration 2 | g01325993 |
- Install bolts (1) and tighten to a torque of 55 ± 5 N·m (41 ± 4 lb ft). Turn bolts (1) for an additional 60 ± 5 degrees. Tighten the bolts in the following sequence: 2, 3, 1, 4.
Note: Apply clean engine oil to the underside of the bolt heads prior to installation.
- Adjust the valve lash for the inlet valves and the exhaust valves. Refer to Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust".
- Adjust the electronic unit injectors. Refer to Testing and Adjusting, "Electronic Unit Injector - Adjust".
End By: Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Caterpillar Information System:
C32 Marine Engine Vibration Damper and Pulley
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Travel Motor Guard - Remove and Install
Installation of the 5P-4889 O-Ring Seal for the Fuel Transfer Pump{1256} Installation of the 5P-4889 O-Ring Seal for the Fuel Transfer Pump{1256}
C27 and C32 Generator Set Engines Electronic Unit Injector Rocker Arm
C15 and C18 Engines for Caterpillar Built Machines Electronic Unit Injector Mechanism
G3500 Engines Location of Components
C32 Marine Engine Heat Exchanger
C7 PETROLEUM Petroleum Engine Auxiliary Water Pump - Disassemble
C9.3 Marine Engine Auxiliary Water Pump - Install
G3500 Engines Self-Diagnostics
C7 PETROLEUM Petroleum Engine Auxiliary Water Pump - Assemble
C9.3 Marine Engine Auxiliary Water Pump - Remove
C32 Marine Engine Crankshaft
EMCP3 Data Link
C9 Marine Engines and C9 Marine Generator Sets Fuel Cooler - Remove and Install
G3500 Engines Electrical Connectors and Functions
G3500 Engines Electronic Service Tools
2003/11/01 Improved Remanufactured Electric Starting Motors are Now Available {1453}
C9 Marine Engines and C9 Marine Generator Sets Fuel Pressure Regulator - Remove and Install
Oil Renewal System Troubleshooting
C15 Petroleum Generator Set Engines Electronic Unit Injector - Test
C15 Petroleum Generator Set Engines Water Pump - Test
C7 PETROLEUM Petroleum Engine Gear Group (Front) - Remove
C7 PETROLEUM Petroleum Engine Gear Group (Front) - Install