2003/12/01 Caterpillar

Integrated Toolcarrier:

IT14G (S/N: 1WN1-UP)

IT28G (S/N: WAC1-UP; 8CR1-UP; 9AR1-UP; DBT1-UP)

Wheel Loader:

914G (S/N: 9WM1-UP)

924G (S/N: DDA1-UP; RBB1-UP; WMB1-UP; AAN1-UP; 9SW1-UP; 3PZ1-UP)

924GZ (S/N: RTA1-UP; AAB1-UP; 6YW1-UP; WGX1-UP; DFZ1-UP; 3DZ1-UP)

928G (S/N: DJD1-UP; WLG1-UP; 6XR1-UP; 7SR1-UP)

The standard quick disconnect fittings can be replaced with a new quick disconnect fitting that utilizes a screw type base. The standard quick disconnect fitting utilizes a connection with a flat face. The standard quick disconnect fitting may be difficult to connect due to the presence of residual oil that is trapped inside of the fitting and hydraulic lines. The new connectors are only available as individual parts through the parts system. The new connectors will not be installed at the factory. Refer to Table 1 for a list of replacement parts.

Illustration 1	g01031794

Illustration 2	g01031796