- Agricultural Tractor:
- All
- Asphalt Paver:
- All
- Backhoe Loader:
- All
- Challenger:
- All
- Cold Planer:
- All
- Combine:
- All
- Compact Wheel Loader:
- ALL
- Earthmoving Compactor:
- All
- Excavator:
- All
- Forest Products:
- All
- Integrated Toolcarrier:
- All
- Landfill Compactor:
- All
- Load Haul Dump:
- All
- Mini Hydraulic Excavator:
- All
- Motor Grader:
- All
- Off-Highway Truck/Tractor:
- All
- Paving Compactor:
- All
- Pipelayer:
- All
- Road Reclaimer/Soil Stabilizer:
- All
- Skid Steer Loader:
- All
- Soil Compactor:
- All
- Telehandler:
- All
- Track-Type Loader:
- All
- Track-Type Skidder:
- All
- Track-Type Tractor:
- All
- Underground Articulated Truck:
- All
- Wheel Dozer:
- All
- Wheel Loader:
- All
- Wheel Skidder:
- All
- Wheel Tractor-Scraper:
- All
- All
Description of Change: New Product Link Software is now available for PL151 and PL201 Product Link Modules. The enhancements included in the new Product Link Software are shown below:
- Capability to enable wireless configurations of Report Start Time for Product Link Modules (ver. 1.5).
- Modem Software Update Capability. Providing older modules with current production capability.
- Enhanced On-Board Data Gathering Capability.
- Event and Diagnostic Data Collection Improvements. Enabling compatibility with newer advanced Caterpillar Electronic components.
- Machine Fuel Level Reporting (where provided electronically by other on-board systems).
- Wireless Network Status Display Improvements. A new Cat ET status screen has been added to display the current status of the satellite network's ground control center. This new Cat ET status screen will also display a numeric indicator of the reliability of the connections.
- SMU and Fuel Reporting Daily. The need to alternate SMU and Fuel reporting has been eliminated.
- Enhanced Digital Input Event Reporting. Data filter has been removed, improving meaning and reliability.
Adaptable To: The new 242-7204 Product Link Software is now being used in production. 242-7204 Product Link Software replaces 224-6310 Communication Software Gp on all PL151 and PL201 Product Link Modules that are in the field. The new 242-7204 Product Link Software is available (in the form of a flash file) through Caterpillar Service Information System (SIS).
Note: Product Link MODEM Software must be updated after the Product Link Software update has been completed. Refer to Special Instruction, REHS1753, "Product Link MODEM Programming with Caterpillar Electronic Technician (ET)".