3512C and 3516C Marine Auxiliary and Generator Set Engines Caterpillar


Gas Pressure Regulator Condensation - Drain

Usage:

3512C 2A2
Pro shromažďování kondenzátu je nutné instalovat do následujících míst umístit odkapávací nohy:

  • Přívodní potrubí regulátoru tlaku plynu

  • Vyrovnávací potrubí regulátoru tlaku plynu

  • Přívodní potrubí vypínacího ventilu plynu


    Ilustrace 1g01014926
    Uzávěr na odkapávací noze přívodního plynového potrubí regulátoru tlaku plynu

  1. Uzavřete hlavní přívodní plynový ventil.

  2. Sejměte uzávěry z odkapávacích nohou.

  3. Nechejte vlhkost vytéci do vhodné nádoby. Zkontrolujte, zda na odkapávacích nohách nejdou nečistoty. Je-li to nutné, odkapávací nohy vyčistěte.

  4. Vyčistěte uzávěry. Nasaďte uzávěry.

  5. Otevřete hlavní přívodní plynový ventil.

Caterpillar Information System:

C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Remove
C11 and C13 Engines Valve Actuator (Variable) - Install
C11 and C13 Engines Valve Actuator (Variable) - Remove
C9 On-highway Engines California Emission Control Warranty Statement
2004/03/01 SOLAS Requirements For Oil Lines {1307}
C9 On-highway Engines Federal Emission Control Warranty
G3500B Engines Fuel Metering Valve - Check - Raptor
2003/08/01 Update Caterpillar Electronic Technician (Cat ET) to the Newest Version {0785}
G3500B Engines Engine Protective Devices - Check
C-15 On-Highway Engine Fuel Recirculation Valve - Remove and Install
G3500B Engines Engine Crankcase Breather - Clean
C11 and C13 Engines Precooler - Install
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Front) - Install
G3520C and G3520E Generator Set Engines Component Location
C11 and C13 Engines for Caterpillar Built Machines Front Cover - Remove
2003/08/01 An Improved Stub Shaft is Used for Engines with Dual Vibration Dampers {1237, 5569}
C15 and C18 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines Front Cover - Install
2003/09/01 Improved Pump Drive Gear for an Auxiliary Sea Water Pump {1242}
Customer Interface for the 3512B Well Fracturing Engine (ADEM II){1408} Customer Interface for the 3512B Well Fracturing Engine (ADEM II){1408}
C11 and C13 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
G3406 Engines Engine Oil Pan
2004/04/01 New Rocker Arm Improves Lubrication {1123}
Cat® Digital Voltage Regulator Wiring Diagrams
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.