994D Wheel Loader Caterpillar


Battery or Battery Cable - Inspect/Replace

Usage:

994D 3TZ

  • Putar kunci sakelar start engine ke posisi OFF. Putar semua sakelar ke posisi OFF.

    1. Putar sakelar pemutus hubungan baterai ke posisi OFF. Cabut kuncinya.

    1. Lepaskan kabel positif baterai pada sakelar pemutus hubungan baterai. Sakelar pemutus hubungan baterai dihubungkan ke rangka alat berat.

      Catatan: Jangan biarkan kabel baterai yang dilepas bersinggungan dengan sakelar pemutus hubungan baterai.

    1. Lepaskan kabel negatif baterai pada baterai yang terhubung pada sakelar pemutus hubungan baterai. Apabila alat berat memiliki empat baterai 12 volt, lepaskan kabel negatif baterai dari dua baterainya.

    1. Lakukan sembarang perbaikan yang diperlukan atau ganti baterainya.

    1. Pasang kembali kabel negatif baterai pada baterai yang dihubungkan ke sakelar pemutus hubungan baterai.

    1. Pasang kembali kabel positif baterai pada sakelar pemutus hubungan baterai.

    1. Pasang kuncinya dan putar sakelar pemutus hubungan baterai ke posisi ON.
  • Caterpillar Information System:

    3500B and 3500C Marine Engines Engine Governing - Adjust
    D3G, D4G and D5G Track-Type Tractors Electrohydraulic Fuse
    D3G, D4G and D5G Track-Type Tractors Electrohydraulic Electrical Component and Connector Locations
    D3G, D4G and D5G Track-Type Tractors Electrohydraulic Position Sensor (Steering) of Joystick Control - Calibrate
    D3G, D4G and D5G Track-Type Tractors Electrohydraulic Calibration
    615C Series II Wheel Tractor-Scraper Hydraulic System Vane Pump (Elevator)
    3126B Machine Engines Throttle Switch Circuit - Test
    Rework of the Stabilizer Link and Tilt Cylinder Lines{5057, 5104} Rework of the Stabilizer Link and Tilt Cylinder Lines{5057, 5104}
    D3G, D4G and D5G Track-Type Tractors Brakes, Indicators and Gauges - Test
    D8T Track-Type Tractor Operator Controls
    Machine Security System (MSS) Integrated Glossary of Terms
    D3G, D4G and D5G Track-Type Tractors Engine and Machine Warm-Up
    994D Wheel Loader Bucket Cutting Edges - Inspect/Replace
    AD55 Underground Articulated Truck Transmission Breather - Replace
    AD55 Underground Articulated Truck Transmission Magnetic Screen - Clean
    D3G, D4G and D5G Track-Type Tractors Electrohydraulic Position Sensor (Forward/Neutral/Reverse) of Joystick Control - Calibrate
    D3G, D4G and D5G Track-Type Tractors Electrohydraulic Position Sensor (Service Brake Pedal) - Calibrate
    D3G, D4G and D5G Track-Type Tractors Capacities (Refill)
    2003/08/01 A Previous High Temperature Locknut is Used in Engine Exhaust System Groups {7553}
    D3G, D4G and D5G Track-Type Tractors Electrohydraulic Forward Solenoids of Drive Pumps and Solenoids of Drive Motors - Calibrate
    Bench Test Procedure for a 988G and 988H Wheel Loader Transmission {3030, 3073, 3139} Bench Test Procedure for a 988G and 988H Wheel Loader Transmission {3030, 3073, 3139}
    D3G, D4G and D5G Track-Type Tractors Electrohydraulic Reverse Solenoids of Drive Pumps - Calibrate
    D3G, D4G and D5G Track-Type Tractors Electrohydraulic Position Sensor (Deceleration Pedal) - Calibrate
    2003/07/21 A New Fuel Priming Pump Is Used on the Wheel Feller Bunchers and the Wheel Skidders {1258}
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.