Centershift Lock Bar and Front Frame Bushings - Install
Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1U-9200 | Lever Puller Hoist | 1 |
| C | 1P-1832 | Adapter | 1 |
| 5P-4776 | Puller Stud | 1 | |
| 9U-6833 | Nut | 1 | |
| 5P-8250 | Washer | 1 | |
| 6V-3160 | Hydraulic Cylinder Gp | 1 | |
| 3S-6224 | Electric Hydraulic Pump Gp | 1 | |
| 5F-7693 | Spacer As | 1 | |
| D | 1P-0510 | Driver Gp | 1 |
| E | 1P-1836 | Bearing Puller Adapter | 1 |
| 1U-7758 | Stud | 1 | |
| 9U-6832 | Nut | 1 | |
| 4K-0684 | Hard Washer | 1 | |
| 6V-3160 | Hydraulic Cylinder Gp | 1 | |
| 3S-6224 | Electric Hydraulic Pump Gp | 1 | |
| 5P-4197 | Spacer | 1 | |
| F | 123-3804 | Bearing Puller Adapter | 1 |
| 1U-7758 | Stud | 1 | |
| 9U-6832 | Nut | 1 | |
| 4K-0684 | Hard Washer | 1 | |
| 6V-3160 | Hydraulic Cylinder Gp | 1 | |
| 3S-6224 | Electric Hydraulic Pump Gp | 1 | |
Show/hide table
 |
When you are using hydraulic cylinders and puller studs, always ensure that the rated capacity of the puller stud meets or exceeds the rated capacity of the hydraulic cylinder. If the puller stud does not meet or exceed the rated capacity of the hydraulic cylinder, a sudden failure of the puller stud could occur. The sudden failure of the puller stud could result in personal injury or death. |
 |
Show/hide table
| NOTICE |
|---|
Do not use threaded rods that have not been hardened as tooling with hydraulic cylinders. The maximum rated tonnage should be stamped on one end of the puller studs. Do not use threaded rods that have not been stamped with the rated tonnage. |
- Use Tooling (D) to install seals (11) .
Show/hide table
 | |
| Illustration 1 | g01013052 |
- Use Tooling (F) to install bearing (12) .
Show/hide table
 | |
| Illustration 2 | g01013133 |
Show/hide table
 | |
| Illustration 3 | g01013136 |
- Use Tooling (E) to install bushings (13) .
- Attach a suitable lifting device to centershift lock bar (8) .
Show/hide table
 | |
| Illustration 4 | g01013051 |
- Position centershift lock bar (8) to the original location and install pin (10) .
- Attach a suitable lifting device to opposite side of centershift lock bar (8) .
Show/hide table
 | |
| Illustration 5 | g01013049 |
- Position centershift lock bar (8) and install pin (9) .
- Install lock (7) and bolts (6) .
- Attach a suitable lifting device to centershift cylinder (2) .
Show/hide table
 | |
| Illustration 6 | g01013047 |
- Position centershift cylinder (2) . Use the machine to position the cylinder rod.
- Install cap (4) and bolts (3) .
- Remove Tooling (A) and a suitable lifting device from blade lift arms (1) .
Show/hide table
 | |
| Illustration 7 | g01013045 |
Caterpillar Information System:
143H and 163H Motor Graders Machine Systems Centershift Lock Bar and Front Frame Bushings - Remove
Machine Security System (MSS) Integrated Glossary of Terms
2003/08/04 Correction to Systems Operation , "Speed Control System" {4000, 4350}
2003/08/04 Correction to Systems Operation , "Pendulum Hydraulic System" {5050}
CP-533E and CS-533E Vibratory Soil Compactors Machine Systems Electrical Schematic
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Electrical Schematic
R1300G Load Haul Dump Machine Electrical System Circuit Breaker
Load Haul Dump Braking System Foot Brake Control
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458} Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Conveyor) - Assemble
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Conveyor) - Disassemble
773E Off-Highway Truck Operation Information
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Location of Electrical Components
3126B Machine Engines Throttle Switch Circuit - Test
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Vibratory Electrical System
CP-533E and CS-533E Vibratory Soil Compactors Machine Systems Electrical System
416D, 420D and 430D Backhoe Loaders Axles, Differential and Brakes Axle (Front)
TH220B and TH330B Telehandlers Engine Supplement Engine - Install
2003/07/28 A New Idler Pulley is Used {1234}
143H and 163H Motor Graders Machine Systems Blade Lift Arm - Remove
143H and 163H Motor Graders Machine Systems Blade Lift Arm - Install
R1600G Load Haul Dump Safety Messages
R1600G Load Haul Dump Model Views and Specifications
R1700G Load Haul Dump Air Conditioning and Heating Control