Gear Pump (Vibratory) - Assemble
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components. To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly. Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination. |
- Install O-ring seal (15) onto the pump.
Show/hide table
Illustration 2 g01012708 - Install seal (13) and seal (14) onto plate (12).
Show/hide table
Illustration 3 g01012706 - Install plate (12) onto pump (6).
Show/hide table
Illustration 4 g01012705 - Install gear (10) and gear (11) onto pump (6).
Show/hide table
Illustration 5 g01012704 - Install seal (8) and seal (9) onto plate (7).
Show/hide table
Illustration 6 g01012703 - Install plate (7) onto pump (6).
Show/hide table
Illustration 7 g01012702 - Install housing (4) onto pump (6).
Show/hide table
Illustration 8 g01012701 - Install O-ring seal (5) onto cover (3).
Show/hide table
Illustration 9 g01012699 - Position cover (3) onto housing (4).
- Install bolts (2) into cover (3).
Show/hide table
Illustration 10 g01012697 - Install clip (1) onto the shaft.
Show/hide table
Illustration 1 | g01012709 |
End By:
- Install the gear pump. Refer to Disassembly and Assembly, "Gear Pump (Vibratory) - Install".
Caterpillar Information System:
AP-655C and BG-2255C Asphalt Pavers Machine Systems Gear Pump (Vibratory) - Disassemble
CP-533E and CS-533E Vibratory Soil Compactors Hydraulic Tank Breather - Replace
2003/10/01 An Improved Alternator Belt is Used {1357}
2003/09/15 An Improved Alternator Belt is Used {1357}
2003/08/04 The Nameplate Is Now Bolted to the Grill {7251, 7557}
M325D MH Material Handler Window Washer Reservoir - Fill
120H and 135H Motor Graders Machine Systems Piston Pump (Hydraulic and Steering) - Install
120H and 135H Motor Graders Machine Systems Piston Pump (Hydraulic and Steering) - Remove
R1600G Load Haul Dump Brake Release - If Equipped
R1600G Load Haul Dump Ride Control Accumulator - Check - If Equipped
Load Haul Dump Braking System Relief Valve (Brake Accumulator)
R1600G Load Haul Dump Hydraulic System Oil Level - Check
143H and 163H Motor Graders Machine Systems Sideshift Cylinder - Remove and Install
Machine Security System (MSS) Integrated Configuration
773E Off-Highway Truck Operation Information
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Conveyor) - Disassemble
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Conveyor) - Assemble
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458} Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
Load Haul Dump Braking System Foot Brake Control
R1300G Load Haul Dump Machine Electrical System Circuit Breaker
CP-533E and CS-533E Vibratory Soil Compactors Vibratory System Electrical Schematic
CP-533E and CS-533E Vibratory Soil Compactors Machine Systems Electrical Schematic
2003/08/04 Correction to Systems Operation , "Pendulum Hydraulic System" {5050}
2003/08/04 Correction to Systems Operation , "Speed Control System" {4000, 4350}