The Nameplate Is Now Bolted to the Grill {7251, 7557}
- Articulated Truck:
- 725 (S/N: AFX1-UP)
- 730 (S/N: AGF1-UP)
- 735 (S/N: AWR1-UP)
- 740 (S/N: AXM1-UP)
- 740 EJECTOR (S/N: AZZ1-UP)
Description of Change: The nameplate is now bolted onto the front grill in addition to being secured with adhesive.
Adaptable To: Bolting the 196-1044 Plate on the front grill is effective with 725 (S/N: AFX961-UP), 730 (S/N: AGF890-UP), 735 (S/N: AWR545-UP), 740 (S/N: AXM1057-UP) and 740 EJECTOR (S/N: AZZ314-UP).
The new arrangement is adaptable to earlier machines.
Perform the following steps in order to adapt your machine to the new arrangement.
Show/hide table
Required Parts     | |||
---|---|---|---|
Item     | Part Number     | Description     | Qty     |
3     | 123-0707     | Hex Socket Screw     | 2     |
4     | 4I-7924     | Washer     | 2     |
5     | 178-9983     | Locknut     | 2     |
- Remove the front grill from the machine.
- Use the dimensions that are given in Illustration 1 in order to locate the centers of holes (2) in nameplate (1). Drill the holes to a diameter of 4.5 mm (0.18 inch) through the nameplate and the attached grill. Spot face the holes to a diameter of 10 ± 0.5 mm (0.4 ± 0.02 inch).
Show/hide table
Illustration 1 | g01012941 |
(A) 6 mm (0.24 inch) (B) 10 mm (0.4 inch) (C) 9 mm (0.35 inch) |
- Install hex socket screws (3), washers (4) and locknuts (5) in order to secure nameplate (1) to the grill.
Show/hide table
Illustration 2 | g01012959 |
- Reinstall the grill onto the machine.
Caterpillar Information System:
M325D MH Material Handler Window Washer Reservoir - Fill
120H and 135H Motor Graders Machine Systems Piston Pump (Hydraulic and Steering) - Install
120H and 135H Motor Graders Machine Systems Piston Pump (Hydraulic and Steering) - Remove
R1600G Load Haul Dump Brake Release - If Equipped
R1600G Load Haul Dump Ride Control Accumulator - Check - If Equipped
Load Haul Dump Braking System Relief Valve (Brake Accumulator)
R1600G Load Haul Dump Hydraulic System Oil Level - Check
769D Off-Highway Truck and 771D Quarry Truck Operation Information
2003/10/20 New Supports for the Fender Are Available {7252}
CP-533E and CS-533E Vibratory Soil Compactors Propel System Electrical Schematic
769D Off-Highway Truck and 771D Quarry Truck Operator Controls
769D Off-Highway Truck/Tractor and 771D Quarry Truck Operator Controls
2003/09/15 An Improved Alternator Belt is Used {1357}
2003/10/01 An Improved Alternator Belt is Used {1357}
CP-533E and CS-533E Vibratory Soil Compactors Hydraulic Tank Breather - Replace
AP-655C and BG-2255C Asphalt Pavers Machine Systems Gear Pump (Vibratory) - Disassemble
AP-655C and BG-2255C Asphalt Pavers Machine Systems Gear Pump (Vibratory) - Assemble
143H and 163H Motor Graders Machine Systems Sideshift Cylinder - Remove and Install
Machine Security System (MSS) Integrated Configuration
773E Off-Highway Truck Operation Information
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Conveyor) - Disassemble
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Conveyor) - Assemble
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458} Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
Load Haul Dump Braking System Foot Brake Control