Diverter Valve (Coolant) - Remove
Removal Procedure
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Drain the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
- Disconnect harness assembly (1) for diverter valve (4).
Show/hide table
Illustration 1 | g01079614 |
- Disconnect hose (3) from the diverter valve.
- Remove bolts (2). Remove the diverter valve from the precooler. Remove O-ring seal (5) and O-ring seal (6) from the diverter valve.
Caterpillar Information System:
C15 On-highway Engine Diverter Valve (Coolant) - Install
C15 On-highway Engine Pump Drive - Remove
C15 On-highway Engine Pump Drive - Install
C15 On-highway Engine Pump Drive - Disassemble
C15 On-highway Engine Pump Drive - Assemble
G3520C and G3520E Engines Engine Mount
C11 and C13 Engines Water Pump - Remove
C7 On-highway Engines Turbocharger - Inspect
2003/07/21 A New Oversized Oil Pump Idler Gear Shaft is Available for 3054, 3054B, 3056 and 3056E Engines {1234, 1304}
2003/11/01 New Unit Injector Rocker Arm Is Now Used {1123}
G3520C and G3520E Generator Set Engines Valve Cover - Remove and Install
C4.4 (Mech) Industrial Engine Electrical System
C7 On-highway Engine Engine Oil Level Gauge - Calibrate
C7 On-highway Engine Refill Capacities and Recommendations
C175–16 Locomotive Engine CAN Data Link
3500B Locomotive Engines Turbocharger Support
2003/07/01 Prevent Coolant Leaks Around the Precombustion Chamber {1550}
UPS 250 and UPS 300 Uninterruptible Power Supplies System Bypass Operation
C11 and C13 Engines Water Pump - Install
C15 and C18 Petroleum Generator Sets Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C11 and C13 Engines Valve Mechanism Cover Base - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Camshaft Gear - Remove and Install
2003/07/21 The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
C15 On-highway Engine Diverter Valve (Coolant) - Assemble