Fuel Transfer Pump - Remove
- Putuskan rakitan selang (1).
- Putuskan rakitan pipa (2).
- Lepaskan baut (3).
- Lepaskan pompa pemindahan bahan bakar (4).
Show/hide table
PERHATIAN |
---|
Berhati-hatilah agar cairan tidak tumpah selama pemeriksaan, perawatan, pengujian, penyetelan, dan perbaikan produk. Siapkan wadah penampung cairan sebelum membuka kompartemen atau membongkar komponen yang berisi cairan. |
Show/hide table
Ilustrasi 1 | g01131526 |
Caterpillar Information System:
C11 and C13 Engines Fuel Filter Base - Remove and Install
C11 and C13 Engines Rocker Shaft and Pushrod - Install
C11 and C13 Engines Rocker Shaft and Pushrod - Remove
C11 and C13 Engines Electronic Unit Injector - Install
C11 and C13 Engines Electronic Unit Injector - Remove
C11, C13 and C15 On-highway Engines 0283-07 Intake Valve Actuation Oil Pressure not responding (91)
2003/07/01 Quality of Remanufactured Camshafts {1210}
C7 On-highway Engine Electronic Control Module - Remove and Install
C7 On-highway Engine Cylinder Head - Install
C7 On-highway Engine Cylinder Head - Remove
C7 On-highway Engine Turbocharger - Install
C7 Engines for Combat and Tactical Vehicles Engine Oil Level Gauge - Calibrate
C11 and C13 Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
C4.4 (Mech) Industrial Engine Electrical System
G3520C and G3520E Generator Set Engines Valve Cover - Remove and Install
2003/11/01 New Unit Injector Rocker Arm Is Now Used {1123}
2003/07/21 A New Oversized Oil Pump Idler Gear Shaft is Available for 3054, 3054B, 3056 and 3056E Engines {1234, 1304}
C7 On-highway Engines Turbocharger - Inspect
C11 and C13 Engines Water Pump - Remove
G3520C and G3520E Engines Engine Mount
C15 On-highway Engine Pump Drive - Assemble
C15 On-highway Engine Pump Drive - Disassemble
C15 On-highway Engine Pump Drive - Install
C15 On-highway Engine Pump Drive - Remove